Search results for query: *

Help me identify this arcade shooter with lightguns I am trying to remember the name of a stand-up arcade shooter which I believe had 2 lightguns (or two potentiometer guns, I dont know for sure). It was a shooter in the way of Terminator 2 or Operation Wolf. But what I remember was the gun...

My cocktail arcade originally had black rope caulk underneath the edges of the glass all the way around, to level and steady the glass and also to keep dust out. That caulk has of course dried and become useless once I removed the glass. But I can't seem to find replacement rope caulk anywhere...

I have been checking lots of online places for cocktail plastic feet covers like these: I've checked the arcade boneyard and similar places, but I have yet to even see another picture of plastic feet covers like these. Mine are pretty chewed up. Anyone know of or seen anything close to these?

I am curious what height other people have their cocktails set? My glasstop is 27.25" off the ground, and the joysticks are 21". I am wondering this because I am now looking for stools/chairs and I don't know if I should raise up the cabinet and look at regular height chairs, or leave it (where...

I remember playing what I think was a Xevious clone on a cocktail arcade cab. I don't remember the name, or if it displayed a name, if it was in Japanese or some strange lettering. We literally called it "The game with no name" when we referred to it. It looked almost identical to Xevious...

I narrowed it down to my +5v picking up interference, so I am going to add some toroids. Which is better: putting two ring toroids together and wrapping wire around both, or installing the toroids in series one after the other on the line?

What is a good way to paint steel cabinet over, after you've removed a decal (somehow) and are in a confined space and can't use spraypaint? Also, what's the best way to remove a decal from steel? I ordered one of those hot decal remover razor things, will that take the paint off the steel too?

It was an upright cabinet, some kind of space sim shooter where you seem to fly down a corridor. It had a large 2-handed yoke, black grips and a red fire button on the tip of the yoke for thumb. Anyone?

So my brass coin mech does not accept coins smoothly, and in fact jams 50% of the time. It appears 30 years of moisture and dust have adhered to the metals. I took off a lower stainless steel piece and scrubbed it with a rough sponge and soap/water and it came out shiny clean. But how to get...

I originally thought that to wire in my coin counter into my JAMMA harness, all I had to do was wire one of the leads to GND and the other to pin 8 and viola. Except I am reading that is not how it works.. Rather, I am supposed to determine 1) the voltage requirement of the counter, 2) whether...

Generic / MAME / Multicade CP button placement stencils I've begun my search for generic CPO to build my panels, but since I am not using a specific game's CPO that indicates where the buttons go, where can I find some generic stencil overlays for placement? How close they are to the joystick...

I know this is probably a noob question, but I couldn't find the answer anywhere: my coin mech supports both NO and NC wiring -- which is correct for a JAMMA harness? I want to say NO because it makes sense, but can anyone confirm? Not sure when NC would ever really make sense..

I have been searching this and other forums for as much info on the JAMMA N-in-1 iCade multi boards that are out there, and after having read a lot of threads, I still have some unanswered questions. (Sorry if this is a long post, I tend to ramble when trying to be thorough.) A brief recap...

This is the harness that originally came in my cocktail arcade cabinet and I was wondering if someone could help me identify what game may have originally been connected to it? The running guess is Mr Do! but I am open to confirmation :)...

Looking for square 1P and 2P buttons for my cabinet. The holes are 0.75" (19mm) square. I would love to find white buttons with the little silhouettes on them, but I can't find anything like that anywhere so far :(

Almost forgot to say Hi :)

Need a 4-wy leaf joystick, can't find the right one.. I need two leaf joysticks for my Universal cocktail arcade project (http://forums.arcade-museum.com/showthread.php?t=299895) but I am having trouble finding, well, anything that fits the bill. The bolt pattern for the mount is rectangular...

This sounds pretty lame, but I have no idea what some of the parts are on my coin mech. I haven't found a good diagram with a "this is x, this is y" labels on it. I am new to cab rebuilds so I am learning from scratch. this part is on my coin mechanism: With the purple and black wire. Is it a...

Pulled the speaker out of my cab, it is a 4" speaker plugged into (what looks like) a mono amplifier. The speaker says "4Ω" on the back of the magnet. Now, every website selling arcade parts that sells speakers, sells 8Ω speakers. I have yet to find a site that sells 4Ω speakers. So I'm...

If you google image search JAMMA harness schematics, you get back a bunch of results and they are not all the same. I have noticed there are discrepancies between some, such as below: Note things like the S/15 and J/8. Does anyone have a 100% true and accurate JAMMA schematic they have...