Search results for query: *

Hey, guys. Wondering if anyone here has a Toki pcb they can part with. Thanks, everyone.

Hiiiiii, everybody!!!! I was checking out the arcade manuals of Daimakaimura and Ghouls ‘n Ghosts for difficulty settings and noticed they’re similar but different. Overall the actual dip position for easiest to hardest is the same between versions, but the description of difficulty is one of...

Hey, everyone. I’m aware that there’s a line-level stereo solution for Namco System 1, but my cabinet doesn’t have an amplifier so I’m looking for a way to use the amplified audio for the R channel at J106. Does anyone know the connector type?

So after some years of searching I finally got a hold of Rolling Thunder. I set the dip switches and found a resource that has 4 revisions listed, with 3 versions having the same dip settings. Mine is one of these 3 revisions but I don’t know which. Is there a way to tell and what are the...

Just pay shipping. I acquired this in a deal with the pcb. Hoping someone has a need for it. It’s not perfect, but looks pretty good for the most part. There is a very thin vertical crack through the “N” and “D” if you look closely at the picture.

A few months ago, he responded to a wanted thread for a Rolling Thunder PCB saying he had one in storage somewhere and he’ll sell it if he finds it. Let me say that a number of people have responded to the same thread for a couple boards with similar messages and nothing has materialized from...

Mr Do back on list after receiving a problematic board in a sale: -Clutch Hitter (not some other System18 board) -Rolling Thunder -Mr Do’s Wild Ride

Kid Niki/Joe & Mac/Rolling Thunder/Sky Kid/Mr Do’s Had an older WTB that hadn’t been revised in about 5 years. Looking for the following pcb’s: -Joe & Mac -Kid Niki -Mr. Do’s Wild Ride -Rolling Thunder -Sky Kid

First off, hello to all the KLOVers out there. Been a long time for me on arcade forums, I hope all my old KLOV friends are doing well. Curious to know if there is a good one-stop shop for fasteners in these sizes in black iron oxide or some other black material. These are the description from...

WTB: Non-working Contra, City Bomber or Black Panther pcb Or one of the following games: -Contra -Black Panther -Labyrinth Runner -Nyan Nyan panic -City Bomber I'm really looking for an IC on these boards that matches one of my pcb's which is defective. If I could find the IC alone I would...

I received a flyback/cap kit from BR that says 14"/16"/20" MTC-9000 after being instructed to buy one from Bob for the 25" MTC-9000. I noticed some differences based on the caps included in the kit when compared to those on my chassis, so I have the following questions. 1. Is the flyback the...

Hantarex MTC9000 25" Horizontal Output Transistor So I'm looking to install this Flyback/Cap Kit from Bob Roberts and it looks like there's a HOT in it. There are two transistors which fit the pin spacing on the chassis but neither has the same printed number as the replacement in my kit. I see...

Wanted: 25" black cardboard monitor bezel for Dynamo HS-5 Found..........

A year ago I had two working boards which I sent for re-recapping. I have not received these back in working condition since and my X-Men's been down for about a year now. I need to just move on and get another working board. If I do ever receive my old boards back I promise to sell one of them...

WTB: PCB's: Breakthru, GunSmoke, Kid Niki, P.O.W., Trojan Looking for these pcb's, eBay BIN prices are nuts on these. Auction prices seem to be ending reasonably but are infrequent. -BreakThru -GunSmoke -Kid Niki -P.O.W. -Trojan

Every source I see says that the player one start button is on the component side and the player two start is on the solder side. However, I just made an IREM classic adapter and have triple checked the signals to confirm that they match the suggested pinout and I am getting reversed start...

Tic Tac containers are great for disconnects and pins Just sayin'. In an ideal world I'd actually have a good amount of space for some small drawers to separate and label stuff. But when your living situation is as cramped as mine you need to minimize volume, and small containers like these...

I encountered LOTS of hiccups on this 5-1 4P project that I was able to remedy with creative wiring solutions. This problem however has me stumped. First of all, I have no idea why this game has this problem. I can verify that the pcb is not defective because a 2nd Wrestlefest pcb of mine does...

Base price is $1.45 with 15% off until the end of 7/13. Additional 10% off if you buy more than 20, ends up being $1.11 per switch. Not bad these days. Shipping can be stupid however through this company, so whether or not it's worth it depends on quantity I guess...

Still looking for version B Shinobi. I seem to miss both of these every time they are in my price range. Looking for the version B of Shinobi and am offering $65 shipped for it.