Search results for query: *

Looking to purchase a Sega Naomi Upright Seat that would have came with Crazy Taxi, 18 Wheeler, or other Naomi Upright cabinets. Please contact me on here if you have one for sale.

Unfortunately, all of my other games are in storage at the moment and there is no electricity there at my storage unit (for legal reasons) so i am unable to test another heater. Pin 9 = 2.1v AC Yellow Arrow = 2.6v BUT.......... I learned something new yesterday. So, I found out why my heater...

I do have an RMS mulitmeter. Fluke Model 117. And when reading voltage it only reads between 2.1v and 2.2vrms AC. I have been using the standard cr-23 pinout mixed with the marked pin numbers of the neck socket and has given correct corresponding values thus far.

So i noticed my multimeter was on wrong setting measuring previous cathode voltages. These are the voltages on the incoming side of the resistors R22 = 191.3v DC R25 = 192.2v DC R28 = 192.4v DC and the opposite side of the resistor R22 = 110v~ DC R25 = 122v~ DC R28 = 110v~ DC These voltages...

Status update: I got the green working. Checked all 3 transistors, all 3 were good along with all 3 of the 1k resistors. It happen to be a lifted trace thanks to the heatsinks of the color transistors being soldered to the same pad. A patch wire installed on all 3 for good measure was done in...

Thanks MKL, yeah I've already went through with my Craftymech TPG and trying to get green, but the only green I can manage to see is only being output during that funny RGB dot that happens on power down in the video above. I appreciate the advice, I will go through the processes of...

Messed with the flyback and colors and now the flyback is about halfway up. Still super dim, still no green. Being that the video above shows green, yet my green doesnt show up imply i have a bad color transistor? I may just order 3 new color transistors and resistors and replace them all

Looking for some help from the mighty awesome monitor gurus here! Let me preface by saying, I purchased a Mortal Kombat 2 cabinet about a month ago, and upon purchasing it, I had seen that the original flyback had been arcing and the monitor wasn't working. Please leave the negative comments...

Lets see the keychains you put on your games key rings! Here is mine! Over the last couple weeks, I put photoshopped and put together a few keychains for all of my cabinets aside from my jukebox and dart machine.

Haven't had a ton of time to work on it in the last week or so, but I managed to bring home the control panel top, stripped it down for new red IL joysticks and new red t-molding I have on the way. Luckily I still had brand new buttons with cherry microswitches still left over from an old vendor...

They came factory with basically a 3 way all metal joystick and two buttons

Well, Now that the monitor was out, along with the PCB backing board & marquee light fixture, I had a large amount of work on my hands. I had to place an order through ArcadeShop for parts and rebuild kits, New Marquee through XL Arcade, Near mint 2nd hand owners manual from someone off eBay (to...

Well, its been several years since I've gotten a good score on a cabinet i want to restore. The morning of August 28th I stumbled across these two machines for sale on Facebook marketplace for a really reasonable price. Me and my good buddy Josh ended up driving a little over 2 hours one way to...

Its really not in bad shape, Its just extremely dirty and has tons of haze from being covered in dust for a long time. This is when me and my buddy picked up our MK2's about a month ago.

I appreciate the reply, i have plenty of Novus, and have drill attachment buffing pads, I just wanted to make sure that was the correct route to go.

Glitch and everybody, The one that sold in the auction is the one that popped up on craigslist in California. The one that was talked about on arcadeblog was a story on my Sega Sundance/Asteroids that i bought from a guy in his basement in a small town in NW Illinois. There is a massive story...

Has anybody polished a Mortal Kombat overlay? Are the originals acrylic or polycarbonate? If so, how did you go upon it and what polish did you use? Id like to retain the original, wet sand and polish instead of buying new. Thanks in advance!

This was the Hoei produced Starhawk cabinet for Japan.

That cabinet on that aussiearcade link is a possibly a prototype. The early hoei licenesd cabs had a weird 2 surface bent marquee. From what i can gather, Hoei had all the licensing at first, put out a couple of machines (very low amount) and Sega took over the licensing i assume.. This was the...

Wtf is that cabinet all chopped up?