Search results for query: *

I think this is a coinco door but I’m not 100%. I need new reject buttons, reject covers and return covers. Thanks

Working on a 7203 for a friend. He said it was vertical collapse, which I see some signs of on the screen. Now it's totally dead, I get neck glow but that's it. Going to start with a cap kit but need to know the number of this cooked component by C104. C014 is bulging at the top and the glue...

I'm trying to finish restoring my donkey kong. I was converted to a vs cabinet at some point so none of the original power cables were in there. I have a two board stack and factory power supply. I'm just short the power cables and control panel harness. I'm unclear on which power cables I...

I’m reassembling my track and field after having it apart for several years. I have the lower marquee bracket but can’t seem to find the correct bolts. Can someone let me know what the correct bolts are? thanks

Not sure if this is the right section but here goes. I'm rewiring my choplifter cab with k7000 monitor with a new twisted quarter jamma harness. I made a jamma adapter and tested it on my bench no problems. I'm having problems with getting the picture to sync. I have tried all variations of...

I recently acquired an outrun upright with a Rev B board. I had a fellow klov member burn the roms for me, when I install the enhanced roms I get strange graphic issues. When I go back to the stock roms graphic issues go away. I shipped the enhanced roms back to the guy that burned them. He...

Recently bought a choplifter was working when I got it. The board was not secured as it looked at first glance so got banged around a little during transport. I boots and starts the ic check but stops at bad ic 0003. I have tried removing and re-seating ic 0003 but no luck. I don't know...

Moved 4600 chassis and tube from vertical to horizontal frame. When I powered on after the switch neckboard was sparking and charred the connector and plug, see attached picture. I looked over the chassis again everything looks to be seated and connected correctly. Was working fine before...

Hi I recently recapped the K7000 that was in my Lethal Enforcers. I had to jack the brightness up quite a bit to get shots to register. Hoping the cap kit would help with that problem. It was working before my cap kit now I only get a very small amount of color in the center of the screen...

Reassembling my dedicated Lethal Enforcers after repainting the front, top and back. I cannot find my before pictures so I'm not sure where two grounding straps go. From their placement seems like they would connect to the power supply case but I'm not sure. So main ground that goes under the...

I'm converting/restoring a defender to a jrok multiwilliams. I have the base coat done or nearly done may need one more coat. Just realized I didn't take measurements of where the original artwork was before I sanded and painted over it. Does anybody have good measurements of where to place...

Was there a dedicated cabinet for Speed Rumbler or was that just a kit?

Looks like there is an auction in Grimes, IA coming up soon. I missed the one last fall and was thinking about hitting this one. Does any body know if they generally post a list of items ahead of time? I checked their website, http://www.amusementauctions.com/, but don't see much. I'm a...

I have a Defender cabinet that has some water damage. I'm replacing the bottom, kick panel, back, and about 12" of the sides. I have a plate joiner on the way so I'll use that to join the replacement pieces for the sides. I'm not sure the best way to clamp those up while they dry. I don't...

I have an old elevator action cabinet I'm starting to restore. The kick panel is in pretty rough shape and I'm thinking about just making a replacement panel. What is the best way to remove that front panel without totally destroying the sides. I took out the bolts on the L brackets on the...

I have two Taito cabinets Elevator Action, Qix, JK etc cabs and a Donkey Kong cab I need to make new bases for. One of the Taito bases is mostly there the other is totally disintegrated. They are both in pretty rough shape and just wanted to get a check on my dimensions before I start cutting...

I have 2 4600s. One is workingish. I can hear the flyback arching and the picture is a little jacked. So I was going to pull the flyback off the other one that is totally dead. The dead one has a cracked neck board so I don't want to transplant that. How do I remove the focus wire from the...

I have a WG U2000 25" monitor that was working. Had it hooked up to my Elevator Action to ensure the board was still working after being stored in the garage over the winter and it worked fine. Badly in need to a cap kit but working. Hooked it up to my previously working Mr. Do again to test...

I have a WG U3000 that will not focus. Was starting to disassemble to install a cap kit. When I was documenting the connections and getting ready to remove the neckboard I noticed this wire unplugged next to what looked like a likely home. Does anybody know if this black wire that is coming...

I picked up a free tv off craigslist yesterday Hitachi CT1954 Tube 510YTB22 Vert 11.8 ohm Horiz 4.1 ohm I have a WG4600 that is badly burnt. Wondering if this is close enough to not have to swap the yoke? Junknet shows Vert 8.3 ohm Horiz 2.7 ohm