Search results for query: *

Managed to get hold of one of these kits. I'm in the UK and installed it fine onto a spare Ms Pac board on my Midway Ms Pac Cocktail. I have a couple of queries that hopefully some of you guys might be able to answer. Firstly upon boot up, the screen proclaims the PCB is running Mad Pac...

Thanks guys for all the feedback. I've opened the machine up again at the weekend and checked over everything, but cannot see any visible sign of cut traces, dry joints, or bent pins on any of the chips/or VRAM/or Bus Sync. The only area of concern I noticed again was around the A8 chip near...

Crazykongfan - Crazy Kong was the only Kong game available in England in 80s apart from a few Nintendo cabs; hence the name, like yours too. OK, thanks all for the help so far, this Ms Pac is starting to make my head hurt. I've pulled the VRAM again, taken the yellow/brown interconnection off...

OK thanks for the input guys. Back to looking at the VRAM board it is then. I'll pull it out remove the yellowy brown socket holder in between the board and the VRAM chip pins, examine and take some photos, post them and report back later.

Thanks for the tip. Sorry about delay, but only had a chance to pull the board out of the machine to check today. OK, +5 pins are giving a reading of around 4.9v, so guessing this is not a problem tolerance level. The edge connector looks like it is in pretty good shape, bit dirty but after...

Thanks for the advice so far. Pulled the 284/285 (they both have no rust and are clean) and reseated them, no change. Wobbled them whilst plugged in and again, no change. The 285 clip strap thing has been cut in the past, so maybe this has been replaced in the past. Could the VRAM be...

Hi, I'm new to these forums, but am hoping somebody can help me. I'm over in the UK and have a cocktail Ms Pacman with what looks like a geniune Midway unmodded PCB. Problem is the machine has run fine for years, but since moving it, the following has happened. The graphics are corrupt, more...