Search results for query: *

I'm debugging my Sega Turbo boardset. Basically all objects seem to draw, but some are white. They include: - Every 6th building or tree - The two outer cars - Some grass or water - Random stripes (16 pixels high I think) through the grass/water that are white. I tracked it down to at least 2...

Looking for a replacement graphics board (P-ROM) or the whole CPU with P-ROM dual board sandwich set. Untested is fine or known bad CPU but unknown condition P-ROM is fine. I have one that plays with graphics issues. Various cars and buildings and trees and backgrounds are solid white. Game...

I've always wondered. Back in the day whenever I saw a game, the screen had a virtually square image. Now when I see for sale listings often (though not always) they are also square, instead of rectangular. I realize what's up... the image size is 240w x 248h in pixels, but wasn't the intent...

Question for anyone (and everyone) that owns a DigDug PCB and has ever connected it up and/or the entire game. Does the dirt have dots on all 4 layers or just the middle 2 levels in the demo mode? Mame shows it on all 4. I have 2 PCBs now bought in the last couple weeks that just shows it in...

I just aquired a partially stripped Bally/Midway mini cabaret and am about to pick up an unknown completeness (but converted to junk) mini Williams (that may have been one of either: Robotron, Make Trax, Bubbles or Stargate) I will be looking for parts for them to bring them back to some...

So, I did my first cap kit on a K4900 chassis. Blasted thing, tight quarters, cheap/easy to lift traces. Have done about 15 other cap kits on K4600/G07/Sanyo 20EZ's, so am not a novice, this chassis just sucks, though at least it was easier to disconnect than a 20EZ. Initial problem was low red...

I would really like a few measurements if you do. I have a water damaged Centuri full size cabinet (bottom 6" of sides swelled and falling apart to sawdust) that I would like to convert into an ATW / Artic mini cabinet. I saw some pictures a while back of someone that had about 4 of them in a...

Edit: Looking for BluePrint, but a Bump 'n' Jump would work too as it's the same profile. I am looking for a Bally/Midway Blue Print upright control panel. Either fully populated with the original joystick and possibly the harness, or will even consider bare. Doesn't need overlay, though would...

I have a 3 layer MCR board set for Kickman. I don't have an original harness or cabinet, but have wired up all the wires per the schematic to a modern switcher power supply. Video and inputs seem to work. However I am having a problem with the sound. When connected per the schematic, I have a...

So, I had a K4600 with a tube with virtually no red, and weak green/blue and a lot of overall burn-in (not etched lines, just full screen dotting). So I swapped in a TV tube. Tremendous pincusion/warping but great colors. So, I figured I'd try my first yoke swap and reconverge. Well, 6 hours...

A friend spotted 3 games at an auction. All were conversions, all had Bally/Midway coin doors. All looked a lot like either a Ms.Pac/Galaga cab (quick tapered top) or a Pac/Galaxian cab (rouded top). However the strange thing was the sides were cut in much closer to the monitor by the control...

I recently obtained both of the popular replacement chassis, one from Alva that is supposedly a WeiYa brand, and one from 8Liners that is supposedly a JenShin brand. I've seen lots of posts on various boards about both, and most state the WeiYa is a better board. After testing about 12...

Need to clear out some room for some 19" tubes for most of my games No pictures currently but will post on request. Will answer any technical questions (e.g. tube swap compatibility, part numbers, etc..) you may have. Pickup only, sorry I will not ship these due to high likelyhood of...

Just pulled from a mini Ms.Pac-Man cabaret machine. Significant Ms.Pac burn-in, but oddly enough not very noticeable under a tinted bezel playing that game. (It would be more noticeable playing other games) Bright picture yet. Selling just the picture tube with original G07-FBO yoke. Harder to...

I've accumulated numerous CRT's over the past few years. Lots of 13" and 19" TV's and 13" composite color monitors (Amdek, Apple, Commodore). I went through all of them noting tube neck size, pins, pin configuration, tube model #, yoke resistance. Also logged what went in all of my arcade games...

I am in the need of the metal control panel from the mini (cabaret) version of Kickman, aka "Kick". This would be the 18" wide panel, not the 23" wide one. I have all the other panel parts so I only need the bare panel, but would consider it fully populated as well. I have a full width one I...