Search results for query: *

I have a WG 7193 that has a wave in the picture. It also has a strange yellow-greenish glow that appears from time to time. I have re-capped the chassis and thought that would be the fix....it wasn't. Any other ideas on what could be causing this?? Bad Flyback?? Thanks for any suggestions... Jim

Does anyone know how this game looks when switched to Standard Res mode?? Thanks for the help! Jim

I dropped my power supply, and now it doesn't work anymore. I hooked up an ATX power supply I had lying around from an unused computer. I checked all the voltages and they all were fine. Hooked it up, and everything was fine. Then the graphics started to act a little unstable and twitchy...

As some of you may or may not know....I have had a problem with my 25" K7193 blowing fuses. I fixed that part but now have some quirky picture problems: The screen is stable when I turn it on, but if I turn it off and then back on it will be scrambled like this: If I leave it off for a bit...

I was wondering if any of you can help me understand this. I took out my HOT (WG7193) and tested it with my DMM. Took out Q11 (HOT), and checked it with my ohms meter. Results: B-E (+ on B): 51 Ohms B-E (- on B): 51 Ohms B-C (+ on B): 1.78M Ohms B-C (- on B): Open C-E (+ on E): 1.78M Ohms...

I am looking for a Mortal Kombat 2 PCB and sound board. Anyone who has one for sale email me at [email protected]. Must be 100% working. Thanks! Jim

Ok, heres the problem. I plugged in the monitor and powered it on, and it worked. Power off, then back on and the fuse blew. Changed the fuse and it blew again! Any thoughts as to why this is happening? Also, I checked a flow chart for this monitor and it tells me to check the HOT (Q11) and...

Hello. I was wondering if you might do me a favor. I have an UMK3 PCB and one of the resistors got knocked off. unfortunately, I do not know the value of the resistor to replace. On the lower right corner of the board there are 8 onboard RAM chips. Right above these chips are two resistors...