Search results for query: *

Yeah, the Ikari Warriors is up and running and it is awesome. Thanks for the control panel. It works great. kspiff, I just won two guerilla war working pcb's off you know where and once I check them out, maybe I could hook you up with one. The one stated it had a sound problem. The victory...

Does anyone have really nice Budweiser tapper cab pics? I would like some nice photos of the side artwork(the black and white bartender picture)(both sides) and any other nice cab pics I could get. I am building a slimmed down upright with original boards. I would like to build the cab as...

O.K. I adjusted the powere supply and now I have both led's on the board lit. Still no sound. I have the speakers running directly from the edge connector and not through a pot behind the coin door. My Ikari worked fine this way and I could adjust the volume with the pot on the board. Is...

I need help with my victory road game. Game plays great, just has no sound. My Ikari Warriors works fine with sound in the same cabinet. Also, does anyone have shematics for victory road and guerilla war. These would help me alot seeing how I only got the pcbs and no literature. Thanks.

I know this isn't repair related, but I thought I'd throw this out there. I stumbled across something very interesting the other day. This lady has a super Pac-Man that was converted into a Mr.Do, an original Asteroids(nice), a Bally Paragon pinball machine, and a Bally Supersonic pinball...

O.K. One more question about my Ikari wiring. I got the game working and I am down to the coin door wiring. The only question I have is the wiring to coin door has like a diode jumping two wires in the molex connector and then one of the two wires is crimped with two separate wires and snapped...

Electrohome 19". I hear it whine and try to adjust brightness and it just stays black. I'm at a loss when it comes to monitors.

I did have the game running to it. Red, green, and blue plus all the sync wires. It did nothing. One is an Electrohome and the other is a Wells Gardner. Both are 19". The one did whine when powered up, but nothing appeared on the screen. Like I said, I hooked this up to a monitor in my...

Will a monitor power up out of the chassis on the floor. I hooked a monitor up to my game board and power supply and iso transformer and I have 115 volts to the monitor and a ground strap to the chassis of the monitor. I get no picture, flickering or anything. I am not good with monitors but...

I have a Galaga 3 game that I got without a power supply. I bought a power supply and an isolation transformer and I was wondering if some one could help me with the hookups. The p/s doesn't have the molex connectors on it. I guess it has to be hard wired and I was wondering if someone could...

O.K. I got around to looking at my boards again and if that board that attatches to the pcb is a jamma conversion board, why doesn't all the connections match? I bought the jamma connector with about 3 ft. leads and it is labeled. The problem is that, following the pins from the game pcb...

Could you please help me with my Ikari Warriors? Mine is the 3 stack board and I need help. It has a little printed circuit board that goes on the edge connector and I'm not sure if it is a jamma conversion board or an interface board. It has the 24 pin connector on one end and a jamma...

Could someone please test my Ikari boards. I would like someone to actually test and get it to play. I will pay just to know that it works or not. I live in Central Pennsylvania. I am lost and I want to make sure it is not me. I would like the sound, video and gameplay all tested. I know...

KRK, I don't think it is a JAMMA adapter, the manual calls it an interface board. This board looks like it combines +5,-5, grd, and changes the pcb's location of hookups. I need help. This is really peeing me off. I'll try to take a picture of it and post it. Thanks you guys.

KRK, you are right. The board that I have is a 3 stack boardset with an adapter that goes on to the top that changes the pcb pin from 48 to 50 something(JAMMA looking thing). Could you please send me the correct wiring diagram or can I just rewire as per the original owners and operators...

I matched the interface pin 1 to pcb 1. Is this right? Then I plugged the harness I got from you to the interface like the manual said. The only thing is that the interface board didn't have a key slot so I didn't know which direction it went on. That's when I started checking wiring...

The connector with your harness works fine. No, I know the joy wires and connections(cn7 & cn8). The connector on the harness is fine it's just the wires are pinned wrong(example:labled spk wires connect to coin switch(I think) on interface board. It just seems to be pinned different than the...

I have an Ikari Warriors boardset and I was told that is was from a dedicated SNK cab. The three stack board set has an interface board attatched to the main pcb. I just got a wiring harness from KSPIFF(thanks) and I also had the manuals for the game. My problem is, if I'm reading this right...

Could someone please tell me what power supply to get for my Ikari game. I am new to this. Where can I buy one and what do I ask for? Side Note: Thanks for everything KSPIFF.

Could someone give a list of compatible games with a useable monitor.