Search results for query: *

I left my games on for four hours and came back to them and Congo had no sound what so ever. Eventually I found out that one of the small caps C45/C46 was shorted, diode test showed a short in either direction. I bought some new ceramic disc caps from radio shack and replaced c45/c46 but in...

Anyone know what size wrench is used to adjust these? I would stick tools down there until I find out but Im afraid to, which leads me to my next question. I only have metal hex wrenches, can I use these to adjust the width coil as long as the monitor is off? I'm a big puss when it comes to...

http://dallas.craigslist.org/ndf/clt/2749973650.html at $9500 its a steal!

Not seeing a lot on searches. Anyone know wh ere they are? Any at bars around town?

Theres a Safe Cracker, something I haven't seen on CL before, that I thought Id mention. I have met the guy selling it and hes a pretty straight forward guy. Not sure if this is the right money for a Safe Cracker ($5100) but from what I understand the production run was only around 1000. He also...

I talked to this guy on the phone and it didnt sound very promising. He said the playfield was worn down to the wood in a quite a few places. I was thinking about picking it up but it sounded like it could be a mess. He told me someone took a look and passed on it so it must be pretty bad. Just...

How do I find my monitor type? Im looking around and I see RCA on the tube but I cant find a brand or something anywhere. Is it possible my monitor might not have a pot for vertical position? Theres one for horiz but not vert that I can see. Theres a vert size but I cant find the position. I...

Im still putting my first pin, Elvira and the party monsters, back together after a playfied cleaning/rubber/wax job and Im not sure if the switches on the ramps have ever worked and if they are installed correctly. Its like a micro switch riveted to the ramp and currently the trigger just...

Im trying to find this in the manual and I can see some of the bulbs listed in the solenoid/flasher section #906, #89. They have a lamp location diagram where they show all the locations but not the bulbs that go in them. They mention #555 a few times in other diagrams. Im trying to order some...

http://www.mouser.com/ProductDetail/Fairchild-Semiconductor/GBPC3501/?qs=sGAEpiMZZMs0LZZU6IgSfjOlxrmuy%2fez9fpABn64mwo%3d Is this the correct replacement for the 6BR1? I have no CPU controlled lights and I traced it back to a wire that burnt off the non-fused AC side of 6BR1. I tried testing it...

Its an Elvira Party Monters described as having a perfect playfield that needs new rubber and playfield cleaning with wear around leg mounts on cab. Displays, sounds, drop targets etc are all working but there is some issue with playfield lights turning off intermittently. Im pretty sure he...

I know this is impossible to know or even predict but Ill ask anyway. Im in the market for a pinball and I want to get the best deal possible of course. Right now there's a pinball in my local CL thats a fair price but not a bargain either. In October theres a super auctions close to me where i...

Whats the going rate for a Taxi in "good" condition with replacement rubber bulbs etc?

Ok so I'm looking on CL and this catches my attention here's the description: FREE 80's Arcade_game cabinet kq 80s, Arcade, Free, all things I like. So I figure its probably to late but I'll email anyway. I get this back: "Im sorry for not replying sooner, I already promised this to someone...

Looking to buy a J-Pac.

Couple questions. I have new Happ joysticks are the shafts in joysticks all the same size? If I bought Joust replacement sticks somewhere would they fit? Does anyone know where I can get matching sticks and buttons in the light blue light yellow colors?

From the isolation transformer Ive got 2 wires going to AC on the power supply and a ground going to FG. These are just household 120 right? I should be able to wire a receptacle to this to power whatever correct? I want to make this work with the least amount of modifications to existing wiring...

Im sooo glad I didnt order all the SF2 artwork this weekend!

Im trying to order my sf2 bezel but Im not sure what to do. The total height of my glass is 21" and so is the bezel template, but with my CP in place I might have 17-18in from top to bottom. Should I be ordering the total height of the glass or whats viewable?

I bought my first game a sf2:ww this weekend and besides a sound issue its working ok. The artwork is a little shabby and the bottom of the cab is chewed up in a few places from being moved but seems solid. I have already found a few places online to replace the artwork, T-molding etc but I also...