Search results for query: *

yeah it does. when i first tried to figure out where the interference was coming from i wanted to make sure all the grounds were connected properly, so i checked every ground i could for continuity with the ground prong. everything came back fine. im still irked about why i got those readings...

some good news! on a hunch i thought some wires might be crossed somewhere, so i decided to check the monitor chassis for ac voltage. i touched one end of my mutlimeter to a loose screw i had lying around and the other end to the monitor chassis. sure enough, i got a reading of .5v. now its my...

i believe the rf filter is built into the power supply as its a fairly new computer based psu. the only other thing turned on in my room is my ceiling fan. but i have several games in this room, and none of them show any interference except this one. no matter where i move it in the room, that...

ok i just hacked a vga cable to replace the current video connection and the interference is still there! i replaced the current connectors with a new, shielded connector that has two ferrite cores at the each end of the cable and theres still interference. now i am really at a loss and have no...

bump - anybody have any idea how i can fix this? the reason im bumping this is cause its hard for me to leave the machine turned around the way it is, and i dont want to put it back without fixing it first. :(

yeah, after discharging a monitor it's safe to remove it from the tube. if you're worried, discharge it once, wait 5 minutes, and do it again. you can do it a third time to be triple-safe. just be careful not to scratch up the tube too much, you might have to use the screwdriver to get the metal...

i cant get any photos of it so i edited a screenshot to make it show what it looks like. this is what it looks like currently http://img43.imageshack.us/img43/2531/daytonaprob1.png that pattern moves as well, kind of jumps all over the place. it either does that, or this...

i just tried that i connected the board to another model 2 setup i have and it works fine, hooking it back up i reseated the connectors but its still showing interference.

ok i just tried that but you can still see it with the brightness turned down. i also disconnected both the "race leader" lamp fixture and the marquee light fixture, but no luck. i really thought that wouldve been it, all the grounds check out all the way to the ground prong on the cord... i...

you wouldn't be able to see anything in the pic. it's very faint. :(

strange interference on daytona usa le [solved! new problem tho] hey guys, i have a question for you. i have a daytona usa limited edition single cab. these units shipped with a k7500 as opposed to the standard nanaos. for some reason, there's interference in the monitor as what I believe is...