Search results for query: *

I'm just confirming the K7915 uses the same flyback as the other K7000 series monitors. I just replaced the flyback, hot and did a full cap kit. Plugged it back in and sizzle, pop. Blew the fuse. No high voltage when discharging the tube to pull it back out. Before I start troubleshooting...

Need it for my APB. Mine is cracked. If I can't find one, I can try and epoxy the old one back together, though it will be missing a chunk. I'm surprised nobody has started 3D printing these yet.

Is there any documentation for the switcher pictured below? I purchased mine from eBay and the games aren't switching by the remote control. I'm wondering how to wire it to a pushbutton to perform the same action. Is there a manual available or does anybody know how to properly wire it for a...

I got an EM pinball machine where the previous owner hosed it down with contact cleaner. There is now a goo between the contacts of a majority of the switches. What would be the best way to try and clean them before using a flexstone? I thought about spraying it with alcohol and blowing it...

Physical condition is not important, just needs to work. PM with total price shipped to 73170. Thanks.

Blue B board only. Battery changed in January of this year by me. The label is a reproduction and is not original. $130 shipped in the US. --iSYWmI5V4

Beginning to clear some stuff out. Putting this up in case anybody needs it. This came out of a Zaxxon cabinet. These are untested and sold as is. Asking $20 plus shipping.

Working on a restoration. Mine is all bubbled up. Not sure if it's due to heat or cleaning products, but either way, I'm looking at getting it replaced. Doesn't look easily reproducible, so likely looking NOS. Hit me up if you've got anything. Below are pics of the mine:

I ran across a site that sold blank fingerboards with an amplifier pre-installed. I can't seem to find it again. Anybody know where it's at?

Can anybody identify what this came out of? At first I thought it was a Pac Man, but I don't think that's it. Any ideas?

FS: Ikari Warriors PCB & LS-30 Joysticks - SOLD! Ikari Warriors non-JAMMA PCB with JAMMA Adapter 9ZRQk8d6XQc Pair of LS-30 Rotary Joysticks with Cables F8HBedJiJGE Cut Down Marquee & Bezel from Conversion $120

I'm making an adapter to test an Ikari Warriors SNK pinout PCB. This may be an ignorant question, but I'm at a loss as to where to connect my video ground per the JAMMA standard. Would connecting it to any ground on the SNK pinout provide the same functionality? I'm using the SNK pinout as...

Anybody know if there are any games in addition to the below list that use the same pinout as Ikari Warriors? I found this list on KLOV described as the SNK conversion class, but sometimes KLOV information is not complete or in error. The reason I ask is I'm making a JAMMA adapter to test an...

FS: Vampire Savior USA CPS2 A+B Board - SOLD Little damage to one of the clip slots on the A board as pictured. Comes with two clips. $110 Shipped in the US of A. Dvv_ZwEk5w4#

I know Arcade Shop has them for $35, but thought I would see if anybody had an extra they wanted to get rid of before ordering from the source. Thanks.

FS: Left Over Battlezone Parts Left over parts from a restoration I was working on. I no longer have any use for these parts. One of the joysticks feels like the bellows is blown, the other is stiff. $30 O.B.O?

Here's a video of the glitch I'm talking about. Possibly this is caused by the chip that handles the scalable objects? If so, I'm not smart enough to know which one does this. I've already looked over the board and see no trace damage and no bent legs shorting to each other. I've reseated...

FS: Sanyo 14-AZL Chassis - GONE! Untested as tube was damaged. Will be provided with yoke and convergence rings. $30 OBO?

I'm needing a part of the reject mechanism of a Coinco coin door. It's the lever that forces the coin mech open when you push on the coin reject button. I'm missing one on my Vindicators and it causes the coin reject button to be loose and sink in a little. Anybody got on kicking around they...

Prices do not include shipping. Will test again before packing for shipping. Midway Skins Game PCB, keypad, joystick and one side of side art. $30 (This will be heavy) SOLD! Capcom CPS2 USA A Board $25 SOLD! Beastorizer (Bloody Roar) w/ZN-1 Mainboard & Manual $30 SOLD!