Search results for query: *

I have a bunch of used 3” Happ trackballs. Most were pulled as part of standard maintenance activity. 2 for $30 shipped 3 for $35 shipped 6 for $55 shipped

A pair of displays with harness. These worked when I last tested them 10 years ago. $65 shipped

I don’t recall for sure where I pulled this part from. Anyone know for sure what it is? Thanks

I have two non-working Multicade boards. I believe one is a 60-in-1 or 48-in-1, and the other is a 38-in-1. The red LEDs on both boards flash. Recycled

Populated VS control panel - Slightly bent around the B button, should straighten with a couple of hits with a rubber mallet. Also, it could use a few new buttons. $85 Shipped SOLD 2 - Cocktail panels, not much else to say here. $33 shipped for the pair Recycled

SI cocktail control panels plus harness & trans block. Picked this up from an OP years ago, time to move it on. $85 shipped I also have the control panel wood parts available if someone is interested.

I want to pair down on the number of storage units I have before the Winter. My first target is the number of 19'' and 20'' raster monitors I have. I'll start with the easy route. Is anyone in the Omaha, NE area looking to buy a few monitors? I have about 20 or so in various conditions and...

I acquired a converted Joust cabinet a few years back. Over the last few months, I've pieced it back together, building the harness from scratch. The cabinet is missing the transformer, so I've opted for using a switcher and a monitor that does not need isolation. The game appears to boot...

I have a box of miscellaneous controllers and controller parts that it is time to clear out. PM with interest in anything shown in the pics. I would prefer to sell the 3 Xenophobe sticks together with the harness.

I’m troubleshooting an Omega Race with some irregularities in the graphics. If you at the pictures you’ll see squished letters, numbers and ships. The irregularities seems to follow columns on the screen. The monitor is fine, it’s in the board. Any suggestions on what to look at?

Pulled this chassis out of a touchscreen game with a bad yoke about a year ago. It appeared to work, but with the bad yoke, it was a little tough to tell. All I have is what is pictured, I do not have the remote board. $40 shipped

I'm working on this Williams Defender CPU board that is watchdogging at a rapid pace. I've verified the issue is with the CPU board and also checked the CPU, decoders, and ram chips. I've also replaced the CPU and decoder sockets. For the most part, the monitor shows bars and sometimes a rug...

Picked these parts up years ago for a project that never happened. I couldn't find a good marquee or bezel price reference so make an offer. I also have the 3 joysticks stored away I will dig out if there is interest. Bezel and marquee sold, I need to dig out the joysticks still.

I have a PP2 that works fine, but the Seaside track and the Suzuka track have red stripes across the road. I've read a few threads where this was discussed before as normal. There were no pictures in those threads for me to compare too. I don't think what I am encountering is normal. I've run...

Tested working Williams Motorace USA PCB $125 shipped, I'll include the harness as well. Sold for $80 Shipped

One of the first games I picked up when I started collecting was a Defender cocktail. I wanted an upright but figured this would do until I found one. After playing on the cocktail for a few weeks, I found I enjoyed it much more than I thought I would. After a few years, I decided to tear the...

I have the top of a Lazarian cocktail and have no plans to use or to build a horizomtal cocktail. Make offer if interested

For trade, a good shape Gyruss with a rebuilt monitor, a new control panel overlay, a rebuilt light fixture, and a high score save mod installed. The monitor is a 4900 with the normal Gyruss burn. I also have a new tinted plexi-bezel to go with it. Prefer to trade or partial trade for a classic...

Midway pistol grip shotgun with holder, tested and working $80 shipped

Crossfire - Motherboard, HD, MegaJamma card - $75 shipped (metal plate available, but not included) Motherboard has peaked caps that will need to be replaced. Untested Tested HD in another machine, it works fine. Tested MegaJamma, it will not sync correctly with a medium resolution monitor and...