Search results for query: *

Hi guys I would like to make more PAT9000 X-Y boards This time the heatsink / sheild box around the Flyback would be prefab. Aliexpress have a suitable alum. box The project would be easier as a result Although the tarrifs may be a killer Can someone in the US please tell me what the all up...

Hi guys We already have the CR23/24 Chassis to CR31 Adapters & Cr23/24 to CR25 Adapters Would there be interest in going in the opposite direction? So for a CR31 Chassis to CR23/24 Tube Price will be US $42.40 Post here, so I can see if this idea is viable Thank you :)

Hi guys I sent a parcel from Australia to Ireland I have sent dozens of things to the UK before, but this is the first to Ireland (if that is important) While filling out the online form at austpost I was asked an additional question to normal I had to add the tariff code I googled quickly and...

Hi Guys The best set I ever found online was not the best, so this is the reason I am submitting this for all Feel free to share https://www.amazingarcading.com.au/Star-Wars-C-Pit_Schematics_Hi-Res_Dezbaz.htm

Hi guys I have accumulated a few SW Boards sets over the years and have started getting them repaired To date I am only working on 5 x MAIN SW & ESB MAIN boards I have noticed 2 x ESB boards have a modification underneath, as described in this article, and the 3 x SW boards do not...

Hey guys Please don't crap all over me for writing a rookie post I admit I'm a rookie. Please go easy! :) If anything, it's dumbed down to suit others at my lowly level of experience I have a GQ-4X burner. It's pretty hard to get an answer to a basic question. So I will post the question and...

Hi there I have a few star wars PCB sets One works properly, and I use it on my test bench My ESB set is completely dead forever, after my mishap with plug P6 & P9 on the AR2 The other sets are unknown Today I wanted to take test the remaining boards to find a 2nd set to fit into my SW UR...

Hey guys I put this together because I want to repair my Star Wars game board that suffered the wrath of reversing Plugs P9 & P6 on the AR2 Unfortunately, I did this years ago to with an ESB board attached Fuses blew, and the board stopped working I wanted to work out what may of happened One...

Hi Guys Can someone do me a favor and order some of these transistors then ship them to me here in Australia Please? Cheers Regards Dez

Hi Guys I have a Star Wars PCB stack which has no sounds at all Everything else on the PCB works properly It worked one day, then went quiet the next What would normally cause this to occur? Thank you

V2000 Problems, Neons flashing. Please help. Video to watch Hey I am fixing a Deflection board from a V2000 The resistors are bridged. Replaced most transistors, tested the rest Some diodes were shorted, so replaced. F600 and 700 were blown so replaced Some resistors were fried bad, and...

CR20 Tubes for WG6100 use, lets get an adapter made, co-op I would like to help out CR20 tube owners If someone is willing to send me their CR20 neck board /connector You will receive a free CR Changer with your neck connector attached to it, and returned free to you as a reward I will make a...

Hey Anyone who's wound a few yokes might be able to help me here I am making an Amplifone yoke. CR23, Fat Neck, 90 degree, large ferrites etc It's for someone else so I fitted it to my test bench to give it a run It's is louder chattering than normal and I cannot get full horizontal width. I...

I have a CRT given to me for a Crazy Climber cocktail. It's a 370ELB22 CRT number It is a CR-27 tube according to http://tubular.atomized.org/ This is the CRT Connector I think: GZS10-3-1 When I look it up the pinouts are unique...

New parts now on the website. T901 for WG K6100 back in stock New items are now listed on our web site Common and rare CRT connectors CR24 Neck Moldings Fingerboards, custom, suit ATARI 86/43 Edge connectors Take a look if you get a minute http://www.amazingarcading.com.au/ Regards Dez

Hi Guys With regret I realize I may never get to this project so I will offer it up to others needing one https://www.ebay.com/itm/123110244103 Details are still available here http://www.zektor.com/zvg/ Threads are here on KLOV, helping you get it up and running I bought it in 2009, and...

Star Wars Yoke Controllers to MAME - Alternatives Discussion Hi Guys I saw one of them Star Wars yoke controllers to MAME adapters on eBay probably made by a certain scumbag, and looked at that 28 pin chip and wondered what is in there?? I wondered if an Arduino or Raspberry Pi could do the...

Hi Guys I am after a working AR1 please I believe there is a different version for Asteroids Deluxe. I'm after the other one IE: Asteroids Please let me know how much, and shipping down under please Thank you

Chad from Arcadecup posted a nice Hi Res manual he recently found. You get good clear pics of the boards So it's possible to make them if you guys are interested Could these be used in a G08 Game with an adapter? The voltages are close The HV board looks pretty straight forward, as do the...

In case anyone wants to follow this, I have bought a winding machine and intend to make yokes Since only the outer ferrites need winding normally, the idea is to make an adapter so that the yoke is wound perfectly every time So as the ferrite rotates, the angle of the ferrite turns 2° 60...