Search results for query: *

I am looking for Arcade buffet. Who has his contact info please.

Thank you for the picture of the security button. I think it was not working because I was booting to a VGA monitor. When I boot with the display through the megajamma it plays blind. You can add coins and start ect but no guns or picture. I took out the neck board and chassis board and took the...

Anyone know where I can get any of those parts?. Not authorized red box comes up on the LCD. I booted to double check the bios setting and let it boot all the way. I suspect the security chip. The monitor only gives a light flicker. The lines roll when I look at them through the camera but...

Not authorized red box comes up on the LCD. I booted to double check the bios setting and let it boot all the way. I suspect the security chip. Can someone tell if I have it in correct or is it upside down. I have tried both ways. I have also tried twisting it to get a better connection...

Do you still have these available?

Signals seem to be good. Neck board or monitor board is now the suspect.

Ok now I have sound and no picture. The game plays. Guns do not work without monitor as to be expected. Either the monitor is bad/ need adjustment or the video part of the JAMMA board is bad. Will check signals next.

When I say "turn on normally" I am trying with a JAMMA IO board in place. See picture below. There are 4 LED on the board. # are always on green and one blinks green. They are right next to the power connector. I know the speaker works through the JAMMA IO board. I heard the beeps telling...

Let's resurrect this thread from the dead and hopefully my STV cockpit as well. I have it turning on, the fans run, the HHD runs the boot up but it goes to a menu of some kind. see picture attached. This is on a VGA monitor plugged into the video card. I get no sound to the speakers and no...

Solved!!!!!! Tron is working You were right. I changed the cable and adjusted the picture and it is good now. Thanks. I never would ahve gotten that without your help. Stan

I have had this Tron game 4 years and finally decided to look at it more closely. I replaced the power supply and now the game plays blind. I can hear the correct sounds and the coin mechs work to add credits. Then the game will play like it should but there is not picture. I replaced the...

Yes I have. I just received a STNG translite from him. It arrived 10 days after he shipped it. It looks very very hard to tell the difference from the original. There may have been a slight shade difference in one or 2 colors but it is hard to tell. At this point I recommend him. Stan

Does anyone live in the Miami Florida area that would be willing to look over a pinball machine that i am thinking about buying? It is listed on Ebay item number 320702627759. I figure shipping would be $250 to $300 to where I am in GA. Stan

Thank you very much!!! This is the result pictures of the table. There are a few small things left to do. Trim on the top and to seal the glass inplace. But it is good enough for now. I left the wires so that if I hook up to 5 V DC the lights will light up. I have put 4 pictures in the...

Big Ben pinball machine apron instruction cards, what do they say? I need a picture of the apron of a Big Ben pinball machine. I have a playfield that is in so so condition that I am going to make a coffee table out of. I need a picture of the apron so I see what the instruction cards say. I...