Search results for query: *

Got this KI board immediately showing this screen. It does not look like the rug pattern screens I have seen in the past but perhaps it is and just looks odd. The ones I have seen have a zig zag woven look to it. I am just trying to see if this is a cpu issue or something else. The attached...

MK1 all working Y-Unit PCB with sound board and ribbon cable. $275 $250 shipped to CONUS.

Super High Impact main board and sound board. Tested and all working. No cables included. Video doesn't look very good because of phone camera but it looks great in person. $200 Shipped to CONUS

Fully working "Final Fight" complete board stack. $300 Shipped to CONUS.

Very nice Suzuka 8 Hours PCB. Seems to work 100% but I can't fully test it without the steering controls and pedals from the original cabinet. $125 $100 $50 plus shipping. Feel free to make an offer!

Found this kit in the box, on a shelf, in an operators warehouse. I believe it was purchased but never installed. Board works great. I found no issues when I tested it. The only physical problem I found, was two of the SIP resistors looks chipped /cracked. (I noted these in the pictures). I...

Title pretty much the covers the issue. Strong red hue all over the screen. Tube is ok (tested with BK 467). This is happening with a VGA signal or when monitor is on and says "No Signal". You can adjust the flyback screen adjustment and make out some blue and green but you can barely tell...

The title pretty much explains it. If you flip the switch, it starts to power up - fans spin, hard drive spins, the dollar bill acceptor makes noise then it shuts off. You can flip the switch off and back on and same thing happens. If I run a cord from the wall outlet directly into the power...

**Video link of problem below**. Got this Robocop PCB that mostly works but it has missing foreground graphics in a grid pattern and missing background graphics. Sometimes the background graphics will flicker in when you move backwards. The text seems to be in Chinese characters. Also the...

Good working Lightning Fighters PCB. Looks like C23 was replaced and socketed at some point and for some reason had some jumpers soldered to it (see picture). In any case it works great and board looks very clean otherwise. $200 $185 shipped to the US.

Good working Lethal Enforcers PCB. $150 Shipped.

WWF Superstars PCB fully working. $115 shipped.

Very nice and clean example that works 100%. Side art is extremely well preserved for a 27 year old cabinet other than a scratch or small nick in a couple of places. There is a couple of spots on the CP art from when the old plexiglass was removed and was stuck to the artwork but very minor...

I cannot figure out what is bad with this chassis. I have followed the flow chart and everything seems to check out. The only oddity is R104 which reads low at 5 ohms in circuit. I tested 2 other chassis' and it read 15 ohms on those. So I figured R104 was bad and removed it and then tested...

I got a KI2 cabinet that had a U2000 in it originally. Only the tube was in it so I pulled it and put in a K7191 that I had on the shelf that I had previously recapped and tested right before storing it for a spare. The montior comes on and displayed an image, but it looked like it was not...

Ultimate MK3 board tested working. $250 Shipped to mainland USA

All boards are tested and working. UN Squadron / Area 88 - $200 - Includes A,B,and C boards - Sold Jungle King - $150 - Sold Prices include shipping to mainland USA

I have a Killer Instinct PCB that I repaired (lifted legs on the CPU) and it is now booting but there is no blue color. It is not a monitor issue. I have also searched for a schematic of this board and found none. Does anybody know what I should look at on the PCB that might be causing this...

Golden Tee Fore Complete Red Board rebooting after IDE Check I have a GT Fore red board that comes one and does the IDE check, finds the drive in about 3 seconds and immediately reboots. If I disconnect the IDE cable, it will check for the drive for thirty seconds or so then say it cannot...

Unknown yoke. Cannot find info on model number on sticker. I have a yoke that has 9a2941-001 on the model sticker. I cannot find any info anywhere on that number. Does anyone know what type of yoke and what chassis it will work with?