Search results for query: *

Evening All, Been very thankful of all the advice on the Voyager. I've just completed a restore of a cockpit also and with your guidance enerything is working perfectly. One issue is the game displays a :Not Authorized: red screen after VCoyager start graphics and high scores are displayed...

Its a Sharp Image 33" Standard Resolution KTM-F_KTX_SharpImage

My Showcase Cabinet Pic Here's a pic of the cabinet.

Thought I'd flaunt my just finished 6 game Showcase packed tight. Has Police Trainer 1 & 2, Lethal ENFORCER, CARNEVIL, AREA51/MAX FORCE and Rapid Fire boards. I designed & made 2 circuit boards in addition to the above game boards. The first to switch the 2 Happ 45 guns between each game and the...

Fixed! Ya that was it. Works Great! Soon as I moved the 2x RGB amp to the Jamma side of the converter card - Walla! Thanks for your sounding board time. Thank God for scopes!

Played around with the dip switches - as best as I can see they do nothing. Nothing changed regardless of setting - maybe in the game but no display changes nothing in the users manual - dont have a service manual. Ya I had the 2x RGB amp between the video card and the jamma converter card. I...

FYI - PT2 is Standard Resolution not VGA As I was diagnosing my gun issue I used a scope/freq counter on the Horiz and Vert sync. Horiz is 15750hz and Vert is 60.02hz. So someone please update the PT2 information on the main site - its states VGA - 31khz horiz. Jack

Think I found it! Scoping the video is a very interesting discovery. Using the original video cable (male/female) the out to the jamma converter card is low and is dim on the display. This is normal for this game. Looking at the red signal and pulling the trigger shows the "flash" which varies...

Yup video run as designed - through the jamma converter board to RGBS jamma output. Monitor is 100% as are both Happ guns. The monitor and both guns are switched to 4 other games installed in the Showcase: Police Trainer 1, Lethal Enforcer, Carnevil, Area 51/MaxForce without issue I also tried...

Police Trainer 2 Gun Issue on a KTM-F_KTX_SharpImage Evening all, I'm a bit at a loss on the lack of the Happ guns not being see on a PT2 and 31" KTM-F_KTX_SharpImage_Sejoo monitor. The monitor is CGA and PT2 is reported as VGA. That being said PT2 boots up with a split vertical screen...

That makes sense. I've got 5 standard res gun games and one medium filling out a 6-1 jamma card in the showcase cab. I learned real quick about arcade monitor resolutions with the med res game on a cga monitor. So in steps the plan to swap out the 33" cga for the Wells. So from what you confirm...

Both are same Trinitron gun style From everything I can locate, visually inspect they're both trinitron type gun style. same socket and same connections. I'm interested in dot pitch, size and mask compatibility with the higher scan rate

What is the difference Between Asking a different way........ Excluding the drive electronics, yoke and rings, what is the difference between a 33" Crt used in a Smart Image CGA monitor and a crt used in a multi sync WGM3392 monitor. If that CGA crt was installed on WGM3392 electronics what...

Morning all, After receiving a EBay won WGM3392 Monday only to find the A80AEJ15X08 CRT neck is broken clean at the socket by either the previous owner or shipper with no way to recoup-I'm passed pissed - out ~$600 - now trying to figure out how to recover. I've got a Sharp Image 33" Standard...

Found it! After scoping from the #3904 DAC thru the LT1254 video amp everything looked fine. Returned the motherboard to the cabinet and rechecked continuity and found a short between the blue and red - pins 12 & 13. Nothing obvious even under magnifying glass. Short was isolated to be in the...

Need to transport 33" Well Garner open frame crt monitor. Anyone going my way?

That's tonights task. Thanks!

I've got an opportunity to get a WGM3392-U0TS07C. I need a cga/ega monitor combo. I've not been able to verify this units resolution exactly. Looks to be digital, so I'm guessing its tri resolution. Can someone please verify/double check my assumption. Thanks Jack

Evening all, Your thoughts please. Monitor and cabling is not at issue. Another game presents fine when plugged into jamma connector. Carnevil has both green and blue video, sound and gun play but doesnt appear to output any red video. Recommendations??

Evening all, I'm gradually integration 6 games into a showcase cabinet. 4 of the games work perfectly CGA to a Smart Image KLM-34 CGA monitor. The 5th game is Carnival King which uses medium res. I installed a Ebay VGA to CGA converter and the game display is good...