Search results for query: *

Anyone know a suitable replacement for the force field button on a rapid fire? Button has a shank diameter of 12.7mm or 1/2 in, the notched section is about 11mm or 7/16 in.

Looking for a A043489 Hall Effect PCB for a Road Runner, does not need to be working. I have an address in Washington State it can be sent to. Thanks

Looking for a Dig Dug marquee and an Asahi Seiko ADD type upper coin door (Used on Mario WB, Punchout, etc) I can have these shipped to Washington. Thanks

Anybody with a Road Runner able to measure the voltage range for the axis on the joystick? Im getting 2.1V to 2.9V which barely misses the green zone in the self test... Another thread mentioned it should go from 0x20 to 0xE0 on the test screen and the ADC0809 reference voltage is between 1.5V...

Looking for these Williams boards: Bubbles CPU (R-9663) Bubbles ROM Williams Interface (Stargate, Joust, Robotron, Bubbles) Williams Sound (any) I have an address in Washington that these can be sent to. Would prefer non-working or untested, thanks.

Looking for the Namco version of the pole position pcb that came in some Atari cabinets (has 36 and 20 pin edge connectors). Dont mind if its working / non working / missing parts. I have an address in Washington it can be sent to. Thanks

Looking for the following parts: Tutankham: CPO 2-Way Wico Joystick base / complete Stern Rescue: CPO / Full Panel Marquee Dig Dug: Marquee PCB non-working Compatible AR-II-01 / -02 / -04, working or non-working Taito: 2x Qix / SD PCB Mounting Plate 2x Back door lock assembly 2x Test...

Im having an issue with a 20ez where part of the image vertically is not appearing, at the very top and middle. The top half seems more stretched out than the bottom. Heres what been done: - Cap kit (APAR) - Replaced Flyback (original was bad, APAR) - B+ at 108V - Tried on another...

Anyone know the name of this connector? Its inside a Korean candy cab (Joyro 29). The pin spacing is about 4mm, the pins themselves are about 1.5mm. The 12 pin connector measures around 20mm x 15mm. Thought it was Amp Mini Mate-N-Lok or Molex Mini-Fit but neither had the same connector shapes...

Working on a k4700 (13" k4600) for a friend, and Im running into an issue. He replaced the caps, including the filter. First time he turned it on, he said there was a loud hum then an arc, followed by the fuse blowing. Turned out to be a bad filter (bought from a local shop). Now when turning it...

Hello, I am looking for the following parts, must be able to ship to Canada: 2x Stern PS-1200 PS Tutankham CPO (original or repro fine) Tutankham PCB nonworking 2-Way Wico (does not need to be in great shape) Bosconian Cocktail Control Panel Pair (Trashed Gorf or Wizard of Wor Panels should...

Anyone have pictures of how the monitor mounts in a Midway horizontal cocktail? I have a Bosconian that was converted to a vertical game I'm trying to piece back together. I can see there's 4 bolts that hold the bottom of the monitor frame on the back of the cab but not sure how it attaches to...

Helping a friend repair a 25" K7000, and I'm not sure what to do next. Hooked up a TPG and currently the monitor only displays a gray screen (+ and - sync), however looks like the sync is locking on to the input as when the TPG goes off it loses sync (the raster lines start to move around)...

Anyone with a Space Firebird in a Nintendo cabinet able to check the voltage levels coming from the ESS board audio output (4 pin connector)? I have a Sega/Gremlin board im trying to get working in my Nintendo cocktail and its putting out about 10V when i assume it should be less than 1V so it...

Powering on the board for the first time gave a purple screen with some sound effects playing in the background. The Z80 cpu clock was fine, but there was no NMI signal. Tracing back VBLK was stuck high. Now checking on the video board, there is no CMPBLK signal either, so I checked the crystal...

For the few people who own Sheriffs or Bandidos, I've created a freeplay mod for the game. You'll need to burn 3 2708's, or you could use 2716's with some sort of adaptor. I've only tested it in MAME, but I don't see why it shouldn't work on real hardware. If something doesn't work properly or...

Looking for the following parts for a Nintendo Space Firebird Cocktail: Space Firebird PCB (CPU, Video, ESS). Either working, nonworking, or untested. Asahi Seiko Coin Mech 1x TKG-23-11 "Control Lever Assembly Plate" (picture below) 1x Nintendo 4-way Joystick Thanks

I have a Toei CM-A14U monitor from a Universal cabinet where the monitor is not displaying a picture. There is the high-pitched sound coming from the monitor, but no neck glow. I've measured the B+ voltage and it's around 33V, the schematic says it should be around 110. I previously did a cap...

Looking for an original Donkey Kong marquee. Does not need to be perfect. I have an American address that it can be shipped to. Send me a PM if you have one available.

I am selling my working Konami Simpsons 4 player cabinet. The cabinet is in fair condition. There is some corner damage at the front of the cabinet. The side art has some damage and fading. The control panel is chipping near the front corners. There are lock bar holes at the front. The marquee...