Search results for query: *

The cabaret collection is growing. Picked this up over the weekend. Needs a new speaker, grille and some work on the bottom front corners, but in good working condition otherwise. Should I do any preventative maintenance to the power supply or monitor chassis?

Just recapped a 13" G07 and installed a new flyback. Also bought a horizontal width cap kit as I am trying to get a bit of a wider picture. Problem is, now the picture is a lot smaller no matter what horizontal cap I use. So I did some research and found many are having this problem when...

Hey gang, long time no post... I finally got my hands on what I believe is a dedicated Galaxian mini. It's the black version with the generic looking logo on both sides. I'm in the middle of sanding it down for fresh paint and discovered something interesting. It has what appears to be yellow...

Need the steering shaft gear for sure, I think it's the B gear? Could also use the larger, spring loaded A? gear. Heck could use them all but especially need the first one mentioned. Anyone have any good replacements laying around?

Problem is in the ram board. It had a short so I removed all socketed components, sprayed all sockets with contact cleaner, reinstalled components and now have these red lines on screen. Tried reseating everything once more with the same result. Anyone know which IC in particular would cause this?

Google isn't much help with this one and neither is the dead battery society. I picked up an upright Cruis'n Exotica and noticed that it has a lithium battery zero power RAM chip at U26. Does this contain data? Is it something I need to replace? I'm worried this is some form of suicide battery...

The story I got on this one was the previous owner installed a cap kit, then broke the neck on the tube during reinstall. I can see new caps are installed. Other than that I know nothing about it. I don't have a B&W tube to test it. Asking $80 including shipping to USA48.

I was told it works but I have not tested it. Includes harness and marquee for $80 shipped USA48.

The PCB seems to be working but I was unable to get any sound. I don't see a volume control anywhere on the PCB itself so maybe a separate amp is required? Anyway asking $100 shipped USA48 for it with the JAMMA adapter, or $88 without the adapter.

This one works but needs a replacement V-Hold pot for the remote board. $100 includes shipping to USA48

This one works but needs a cap kit. $65 including shipping to USA48.

This chassis was cleaned and recapped about 5 years ago and has seen minimal use since. Beautiful picture. Asking $140 which includes shipping to USA48.

Picking up a cabinet on Sunday. I believe all it has left of it is the control panel and coin door. Any value here or does anybody need anything?

Can it be done? Is it a simple rom swap?

Been sitting on this for years. I'm sure it's still sticky but no guarantees. $35 shipped USA48

Cleaning out some spare parts that I'll likely never use. Maybe you can? 2 complete wico joysticks (one 8-way one 4-way I believe), as well as a partial assembly and 2 random shafts. Used buttons as pictured. Some will need cleaning. A few of the leaf switches are missing. One box of 89 bulbs...

From my personal collection. Cage is still in my cabinet but I will include it. Worked until recently. Now the picture just rolls.

Both boards work. Krazy Bowl PCB includes manual and trackball harness. Capcom Bowling Translite marquee is cut to fit a Taito cabinet (23 3/4" x 6 3/4"). Used button labels included. Cookies & cream trackball assembly is in good condition but would benefit from some new bearings. I may also...

Working pull. Hasn't been serviced, good picture, but could use a cap kit. Includes yoke, rings and degauss coil.

Cabinet is semi rough and I need the monitor from it. Has both Capcom Bowling and Krazy Bowl boards in it. Selling as follows (prices include shipping to USA48): Capcom Bowling PCB & Translite marquee $60 Krazy Bowl PCB, trackball harness and manual $60 (this game can also be played with a...