Search results for query: *

Just thought I'd share these repro mounts I made for my DK cocktail project. I was having a hell of a time finding replacements (or at least affordable replacements) so I just opted to make them myself. There were no mounts on my project, the whole glass top was held on with gaffers tape so I...

Anyone have one of these from a curved cab or that isn't cut (goes past the shoulder of the guy on right hand side). ?

10 hours in Sunlight (two 5 hour bakes) avg outdoor temp was 85. I put an untreated shroud next to it so you can see the difference. I'd say it works, and works very well!

Stumped on this one. Capped chassis with correct FBO cap list. New HOT and VR that match the FBO list (HOT is NTE89) Flyback is the CBO flyback, but the original doesn't work either. I've tried both. Ceramic resistors 220 and 2/7W test to spec. Screen shows definately low B+...

Have not found a definite answer on this. Both when its plugged into the game board (which I don't know if its working) and when the monitor is not plugged into to any signal at all, just power. The screen is all white, brightness pot does nothing. Monitor is an XM-702 and capped with the 701...

Does anyone had the height and width dimensions of the base for sea wolf? I need to cut a new one for mine and search comes up with no actual dimensions. (though the google sketchup is amazingly helpful, so thanks for that!). Thanks!!

I have a GO7-CBO that's working, more or less, but the B+ will not go above 116.4V with the pot all the way up. Voltage Regulator and HOT tested an not shorted. B+ Pot is new Every resistor checked and within %5 Board has been capped. Polys have been removed and checked. Fly-back is...

This is to fit in the Date East curved marquee cab. Should be able to see past the shoulder of the guy on the right. Thanks!

WG 19K4653 and negative sync. [SOLVED] Is there any way to make this monitor accept negative sync? Can I add in the daughter board that has the negative sync circuit and it will work? (my daughter boards currently only have the RGB-G-PosVS-PosHS. .. no neg sync at all.) I have three of these...

Need an uncut marquee to fit on a data east curved cab. Anyone have one? Thanks!

For the curved data east cab. Like such. (but not MR, need a Heavy Barrel for this cab). lemme know! Thanks! FOUND ONE! Thanks!

For Astro Blaser, or zaxxon. 6x9 speaker grille. Thanks!

Anyone? Doesn't have to be minty just not thrashed. thnx!

Defiantly not mine but someone go get this who is near Millersville Maryland DAMN! http://www.ebay.com/itm/Arcade-Game-Space-Encounters-/221140975139?pt=LH_DefaultDomain_0&hash=item337d077e23

HALP! I pulled apart the harness to re-pin and connector the harness thinking that I could just look at the other harness I had as a map to put the wires back in the molex block in the right order.. only to after the fact find out the other harness I have.. is not evidently a Pede harness...

ALL great sellers! jimk, micksimmonds and alexcc sent all items very quickly and all well packed! Garagearcadecom was local and GREAT to do business with. Thanks to all for yet another list of positive KLOV transactions!

Fast shipping, well packed, GREAT price. His 100% feedback ain't no lie!

Packing and shipping were great, awesome communication with fast replies to PM's. Thanks man!

Fast as lighting shipping, packed to survive a tumble down a mountain, coin door nicer than pictures, and a great price. Will totally do business with again!

Not mine but shit someone get this!..er 110 http://www.ebay.com/itm/1970-MIDWAY-S-A-M-I-Arcade-Game-/150808451325?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D8142841071022087894