Search results for query: *

Do you have a picture of the chassis? That might be easier for someone to identify, neckboards alone can be harder.

So I decided to find a donor for the Wells Chassis and say screw the MakVision. I found a Phillips TV HD2528-C122 (tube number A63AFW36X) in the trash. And it was a success! I was able to keep the yoke on and just splice it with the orginal connectors from the Zenith A63ADG25X. Is there still...

Cool, ill check those things out. Thanks again guys!

Thanks for the help guys. I am unable to test the monitor on a pc cause the guy I bought it from cut the plug so it is just bare wires. He also didn't include the adapter board, do that do anything with the signal or does it just make it so you can connect the monitor with out cutting the VGA...

Im sorry, it isn't a K7000, it is a 25K7191 if that changes anything.

Will that tube swap ok? Will it cause any damage if I do swap them if it is the wrong tube? I'm not real sure how to ohm out the tube to check if they would work together. Thanks Buffett. P.s. - do you think it is a sync issue that im not catching a signal to it?

Pic of problem here is a pic of my issue. Also to mention with the RGB plug I just connected exactly how the other monitor was. I had my RGB wires and then a black and grey wires. I connected the black to black with the monitor and the grey with a yellow wire coming from the monitor.

Having a issues I think with a frequency issues. I have a Striker 1945 board that I swapped a k7000 25" for a Makvision model 3M25 25". The K7000 had a bad tube so I decided to swap it with the Makvision which I believe is a tri sync. After I hooked power and the RGB to it I fire it up and I...

I was looking for adapter 7&8 and 9&10 for a Sencore CR70. If anyone has these or a broken CR70 that includes them let me know. Thanks!

They are probably using the PPU from Hogan's Alley to run the Sky Kid ROMS.

I wouldn't worry about covering them up, it won't harm them. It is flammable so make sure any gas is turned off, wouldn't hurt to kill the power either. As for the mold, if it is just some surface mold it would just hit it with some bleech water to neutralize it. Always do a test area to make...

PM sent....

Looking for Kings of Monsters 1 and 2 (prefer with mini marquees). I also have Fatal Fury Special and Mutation Nation for trade. (both have mini marquees). Thanks in advance.

Cool, i'll give that a try. Thanks!

Thats probably a question for another thread lol

I havent tried it with any other tubes. How can I tell if it will work with any of my other tubes?

The image moves with the line missing no matter how I position ir or resize it.

I adjusted the size and the pos and the problem doesn't change. But I didnt adjust the width coil, I was afraid of throwing the picture off to much. I'll give that a try tomorrow. Thanks guys. EDIT: modessitt is right, I didnt see a width coil adjustment. I tried the trap and pincushion...

I can confirm #3 is Raiden

Anyone have any suggestions? I've done all the adjustments I can.