Search results for query: *

Hello all! I just acquired an NFL Blitz board. I'm running the compact flash instead of the hard drive. Everything is working great...except for it's not outputting any green color? Anyone know why this would be? Thanks a bunch!

If anyone has one of these, I'd be quite interested! Thank you!

Hey everyone, I recently bought an NBA Jam in a universal Midway cabinet, and am currently restoring it. The monitor worked just fine, but appeared to need new caps and a flyback...from what I could tell. Anyhow, I did the cap kit, flyback replacement, and when I hooked everything back up and...

Hey all! Just as the title says...need a new wood control panel top and side art for an NBA Jam I'm restoring in a universal Midway/MK1 cabinet. Thanks a bunch! 😁

I recently took a gamble on an untested Seattle pcb...not being fully familiar with the components. I happened to notice that what appears to be a heat sink and transistor or audio amp is missing from mine...it appears that it was broken off somehow...(the attached pic is a stock pic of a...

As the title states...looking for a working pcb. I have the sound, boot, security chip, and flash kit. Just need a working board to get her up and running.Thanks!

Just as the title says...need a HDD power cable to connect my Blitz 2000 Gold Flash Kit. Thanks!!

Just as the title states. I have all the necessary chips, just need a known working pcb. Thanks!

Hello all! I acquired this Wolf Unit many years ago, and I was wondering if anyone else has had this issue? When the board DOES boot, I get the "bong", rom test, and it even boots into the game...(can coin up, start a game, etc.) However, as you can see in the images, the graphics are all...

As the title states, I could use a little help with my Smash TV. Initially this boardset worked great...about 5 + years ago. I tested it after being in storage for that time, and it booted to the rom test screen, but showed errors on U95, U96 and U97. Upon examination, the sockets had quite a...

Hello all! I don't know of anyone has ever posted this, or is even aware of it or not...but I was messing around with the dipswitches on one of my MK boards today, and I noticed that if you have either the "NO BLOOD" or "NO VIOLENCE" switch enabled, it changes the "MIDWAY PRESENTS" text color...

My MK1 soundboard was working fine, but also had some minor to moderate interference/scratchiness. I decided to replace all the radial caps, just cuz I had them...and hopes that maybe this would fix the issue. Well...after successfully replacing the radial caps, all audible sound was completely...

Ok...soooo, I noticed that my coin door lights were kind of wonky recently. They are the LED version of the common 555 bulbs. I just figured that maybe they were getting bad and needed replacement, but apparently I was wrong. I took them both out and checked the voltage to all the contacts...

I've noticed that when I shut off my monitor, you can hear a "popping" sound. It's done this for a long time now, but I never really gave it too much thought. Any insight would help! It's a K7400 chassis/neckboard on a U2000 tube. Here's the link to the video in my One Drive...

Just as the title states, I could use some help with this process. So I gathered 16 eproms (M27C4001, 27C040 for the game roms, a M27C2001 and 27C020 for the sound roms.) I erased them all, verified they were blank, burned them all...yet I get nothing so far. I'm thinking I may have burned the...

Just as the title says...looking to replace my jamma harness wiring, as it is getting wonky. So if anyone has a full jamma harness with all the connectors intact (P3, P4, etc.), I would definitely be interested. I do have a spare jamma harness loom, but I really don't want to have to splice in...

Hello all! I've been out of the arcade scene for over 5 years now, and had just recently fired up my cabinet last night. Everything seemed to be fine at first, but then the pcb started resetting itself. So I adjusted my -5V to spec, and then it went from resetting to just flashing from black to...

I'm not sure if this is the correct section to post this, but I have been having an issue with images not loading when I click on them. I've been going through the Trading Post portion of the forums, and 99% of the images I click on give me the message, "The requested content cannot be loaded...

Just as the title states...thanks!

I just recently acquired a Smash T.V. boardset from a forum member. The main pcb is working perfectly, but the sound board seems to not be functioning properly. I have the power cables, ribbon cable, and sound pot all hooked up correctly, but still getting no sound. So, I'm curious as to...