Search results for query: *

Plugging away, no pun intended at my Point Blank. I have this 15 point connector on the gun i/o board as you can see. What connector is this? Can I remove it? Can I replace the pins in it? And anyone know where I can get a new one? This new pcb, surface mount stuff is hard to find the traces...

Hey, Sorry if it is obvious, but I can not figure it out to save my life. It seems do damn familiar. It looks to be a 2 part cabinet similar to zaxxon, but I can not find the profile anywhere, or its an optical illusion and messing with my mind. And are those joysticks even rotating?

So Game room is painted, Carpet going in, my mind is moving to base Molding, Door Casements, and I am thinking that the corners of the door sometimes have 4x4x1 Rosettes. Instead of your standard why not Space Invaders Rosettes. No this is not my frame or wall color. But Replacing a Rosette...

My Space Invaders Deluxe has an occasional Reset. Hadnt reset in over a week, and I bought the Braze kit and installed and it goes through self test fine. But the occasional reset has returned. Generally about 5 minutes into gameplay it will reset. Then get get worse until graphic glitch and...

Anyone ever have a pcb with a curl in, bent like a U? I bought a SkyShark about 16 months back. It had no back door and the pcb was curled and hanging from the harness. It had busted the harness, snapping about the last 4 pins. because of the curl. I assume it was heat related. I took the PCB...

So last Spring my oldest daughter took over my 18x18 game room as hers, and my games made it out to the garage. Not a bad space, it is 60x24 but, it is a garage. So I took the back 24x29 and began to make it my game room. It's had its up and downs, and has been slow progress. But here it is so...

Excited about this one. Has been 16 months since I scored a game. Mostly my own choosing and being a cheap bastard I suppose. One side is looking pretty good, the other is crap. Was expecting another project game(5-6 years since he last played it), but was pleasantly surprised. When I showed up...

Whats the best outlet spacing from an arcade Point of View along a wall? 6 foot seems too little, thats only 3 along a 24 foot wall. 4 foot ? that would be 5 along a 24 foot wall. That seems better. Planning on hooking the games up to banks of those multi channel surge protectors but still...

Got tired of just cardboard in the window, and didnt want to do shades, so made these up. Rough cut lumber from the shed, $9 worth of paint for each, 3 sample size colors. A couple printouts on the computer 8 1/2 x34. Painted the base. Cut 1st stencil out, spray adhesive, stencil, and...

I was trying to tack the back on, and like an idiot, didnt remove the old staples and instead tried to tap it on. Now the red gun(player 1 doesnt register) 1) Red gun sounds, and shot registers but no light on the screen and you can't hit a target. I got like 1 in 100 to actually register. 2)...

Not really sure about this thing, but couldnt really turn it down. A Bingo Pinball machine. Haven't hooked it up yet, but supposedly works, and not bad shape for its age I would guess. I dont know anything about it other than it was in its time, 1959 I think, Bally's best earner, and only 6 or...

I ordered some D1398's transistors for Hots for k7000. They arrived wet. Would this damage them? I tested them, and all test the same. Black lead on middle and red to the legs. The left leg reads fine on diode testing, the rights all read O.L. Arent both legs supposed to be around the .5 or so...

So on the final stages of restoring my Super Contra, and one of the joysticks Grommets is broken, rotted away. I ordered a couple replacements from Aracdeshop, BUT I can't get the damn old one off, just the metal ring is stuck to the shaft. I have wd-40'd it but to no avail. Anyone else ever...

Picked up a Too Crude playing blind a few weeks back. Beginning to trouble shoot the K7000 monitor. Was planning on a full capkit but figured what the hell Test power and fuse 1st. Would like some help and double check with my work. Power to the monitor is 122. F1 Fuse is blown - Supposed...

So literally 1 day after shipping my Sly Spy PCB off (because I didnt have a cabinet for it, and I always hold onto things for far too long, or so my wife says), I pick this up ... Yeah, maybe not the greatest game, but damn, its a nice cabinet for a multi jamma, with a little work. And Sly Spy...

I don't know. Not going to call it buyers remorse, so much as drivers remorse, lol. Damn I'm tired. A long day 5am-4pm horse show with family, in the sun, holding the horses, grooming, doing the dad thing. Cleaned the truck, grabbed a friend and hit the road at 4:15 for 2.5 hour drive to pick...

Not really sure where to put this, but thought I would ask here. I have a 9 yr old daughter who really wants Simms3, with the Pet add-on. I dont know much about these, but wondering if anyone out there does on Simms3. Its rated teen. Anything not good for a 9yr old? Any parental controls that...

After 7 months without buying a game, maybe more, I picked up 2 this week. Sunday night I may have hit an all time low, lol. I picked up this Sly Spy conversion, and with the exception of my Point Blank I stay away from conversions. Think she was a Ms PacMan in her previous life. It had been...

Just bought a NFL Bltiz, Power Supply is a Box Peter Chou. Game won't run. After 60-90 seconds goes into shutdown, dropping voltage from +5 or +12 down to less than +1, If I adjust the pot, it shutdowns. Seems fairly normal for these beasts. Not sure the exact model yet, going to pull the supply...

So, thinking of picking up a Blitz 2000 Gold, 2 Player. Cabinet seems to be solid good condition 7or8 Maybe. But game doesnt work. Supposedly stopped working. Monitor powers up. What would I be getting myself into? Supposing power supply, or hard drive or PCB or all three, lol. Most worried...