Search results for query: *

Just picked up a converted Journey with everything in it still, except main board, bezel and marquee. This old game is out of stock on the repro with no ETA. Looking for a repro or an original in decent condition.

I have been trying to repair my reactor pcb that I have a thread on and have not really made any progress. I believe it is an addressing problem that further down the line is not allowing an enable pin on a chip (74ls245) to be active (it is high) that is in the addressing and data bus control...

I understand that you should not be able to get a reading with a logic probe on the crystal. I am really at a loss at this point & decided to check it anyway, it is reading low. History of the board is that it was working fine and then it started to do random weird sounds and graphics and the...

WTB: Cloak and Dagger control panel for Defender cab Looking for the metal control panel that fits the defender cabinet for the conversion kit.

I need one speaker cover for the above. I assume a lot of other machines covers will work as well but do not know which ones are the same.

My pole position 2 PCB has low volume. It is not anything related to the cabinet, AR2's, etc. I know this based on the boards being tested in Robotronguy's cabinet. His game is turned up fairly loud and when you take his pcb out and put mine in the volume drops drastically. The volume on my...

posted in wrong section, please remove.

13" nintendo sanyo is back feeding power to game pcb For more background on this issue see this link. http://forums.arcade-museum.com/showthread.php?p=3046324#post3046324 . So I got this game totally not working. I have determined that the monitor is feeding 6.5VDC back to the edge connector...

The original from what I read is a 3K and is pretty much obsolete. I went to my local electronics store today and they told me I could use a 5K one it's place. They said it just would be more sensitive to adjustments but that I should be able to dial it in. Is this all true, I don't always get...

I am trying to help someone locally who bought this cocktail non-working and posted an ad for help. When I got to his house the game does nothing, no coin op, no sounds and no monitor. I brought the whole cabinet home and tested the game board in my cab and the game board does nothing, it is a...

I have put up a couple of previous posts about this monitor and finally figured it out today. When I got the monitor it had a picture that would shake up and down and when it would shake upwards it would get slightly blurry. First thing I did was fix the neck board that had the corner broken off...

Polarity to thermistor 501 on k4900, can I repair it? Doing a cap kit on K4900 and notice the thermistor at 501 is broken. I desolder it to get a closer look and when it came out it finished completely breaking in half. After researching last night I have found that no one really knows a...

I pulled out my monitor to do a cap kit and found that the corner of the neck board was mostly broken off where what I believe to be the ground wires attach to. First can someone confirm that the ground strap wire around the tube connects here as well as the ground going from there to the...

Fixed! The answers are yes, both wires went where I thought they did. Now do I do a cap kit on it or just leave it alone because it is working? I bought a captains chair about 6 months ago completely not working. I got it working to find that I had a little collapse or fold over on the left...

Sorry this is so long, I just wanted to give all the information I had. I just recapped the board and replaced the flyback and when I test my B+ voltage on the large white resistor I usually get anywhere from 114 -116V DC with the pot turned all the way up. When I test the other end of the large...

Should I use a CPO that got creases in it during shipping? I got a cpo from another member awhile back and it got about 4-5 creases in it during shipping. I would say the longest crease is probably about an inch long. The creases are from the package getting damaged like other things were set...

I am looking to possibly trade a q-bert for a pengo. Let me start by saying this is one of 3 qberts I got as a bulk buy so I already have one I will be keeping. I was hoping to fix them and then sell two of them but I am not sure I could get what I paid for them with the shipping as they are not...

I am interested in purchasing the mad planets items in the for sale section but I need the spinner. Anyone have a spinner they would like to part with? Please pm me. Also has anyone confirmed that a arkanoid spinner will work? I have seen posts where people say they will try it but never see a...

What is this hack on my RB Tapper "fixing" I just bought this RB tapper and it did not have sound. The first thing I did was to remove the hack that goes to the capacitor on the ssio board shown in the pix. I just removed the wire from the ssio board and left the rest connected. The game still...

I am looking for peoples thoughts on these machines. They are both for sale locally but I believe prices to be a little high, Xenon$1100, Taxi $1500. I have personally seen the Xenon and it is in excellent shape with no playfield wear and LED's throughout. I have not seen the Taxi yet. From what...