Search results for query: *

Since it's intermittently booting I assume I haven't killed anything with voltage yet. I'll gladly turn it down. Since I've cleaned all the contacts I was contemplating if I should try making a new serial cable to the gun board. Could it be a bad connection on the gun board itself? I'm tempted...

Probably 50/50 chance it boots. Runs OK once it boots. Currently has no sound. I've replaced power supply, cleaned up the gun board and connections, and cleaned all the filter board connections. I know Model 2 is power-hungry. Anyone have a suggestion of a good test point on the board? At the...

No idea on the serial number, but from the date and the 4p controls I agree it'd be NBA Jam (probably TE). Only thing I can think of is to compare the mounting holes on the mounting board to a NBA Jam PCB set. From your pic I think I see holes toward the bottom for the smaller sound board...

My degree is in Illustration, so I'm definitely familiar with the fine line between reference/inspiration and copyright infringement. Turns out you may not be off-topic at all. I don't think it's a stretch that whoever did the Galaxian art was familiar with Roger Dean's artwork. While they...

We're all aware that a lot of arcade art "borrowed" heavily from other sources. Today I stumbled across this album cover on fontsinuse.com. Isao Tomita's album is from 1976 and Galaga from 1981. While the Galaga image is much more dynamic, I'd say it's definitely derivative. A quick search...

First of all, thanks for the help. I ran out of time at the arcade, so I pulled the whole monitor to bring home. I'll check B+ tonight or tomorrow. Will also check for voltage on the remote board. This'll be the first monitor I can test after adding an ISO transformer to my bench. I didn't...

I have a Cruis'n World that stopped showing the game on the screen. It has high voltage and neck glow, but just a black screen displayed. Same thing you'd see if you powered up a working monitor with no video signal. Being a pair of cabinets I swung them around and the CW PCB will show video...

I worked for Kinko's/FedEx Office up until about 5 years ago. Since we were the only local published phone number I got to learn quite a bit about FedEx operations. Saying "Representative" (maybe multiple times) was the fastest way to talk to someone. Although that just gets you to the hold que...

Don't know about Pengo specifically, but with vertical games some manufacturers chose to rotate and mount clockwise while others rotated counterclockwise. I'd just swap yoke wires if it's easy enough.

This is mostly a note here since the manual is a bit vague on setup and like my used pair may not have the original network hardware. Don't do what I did, make sure the network settings are correct on both cabinets BEFORE you start troubleshooting the network stuff. Network setup process is...

I replaced the R213 neck board resistor just to play it safe. I reflowed/replaced the solder in the section including R101 and R89. I patched one of the traces to R89. Still had continuity, but wasn't looking very good. Once back in the cabinet, it powered right up and looked great for around a...

I'm guessing it may be a resistor issue since I just did a cap kit including c57. Unless another issue is stressing and/or taking out the C57 caps.

I won't be able to check anything until tomorrow, but I'll let you guys know what I find. The part that has me a bit baffled is the intermittent nature of it. Like maybe some component is heating up, failing, then cools off enough to start working again. I just don't know where to start looking...

I have a 25" k7000 that's in a converted Mortal Kombat cab. It's in a public arcade, so I found out at one point that sometimes the screen wasn't on. It usually fires up when I power up the machine, but after awhile there will be no picture. I finally caught it while it was off a few weeks ago...

Adjusting contrast would help a bit, but would never make it go away.

Kortek/Telcovision KT-2602m dark image and streaking This monitor came with a Cruis'n World. Anything white or bright would streak off to the right. I figured I'd start with a cap kit. Eventually gambled that the Sharp Image 325 kit would work (and it did--all values matched). When I installed...

Oh, well. At least you have a simple solution for your cocktail. I'm half tempted just to replace 2p start button with a button plug and make it 1-player only. It's been in the arcade for 2 months and none of the customers have said anything about it flipping. I looked back at a pic I had of...

Thanks arcadeaction, sending PM.

Thanks guys. That's exactly what I needed to know. Wish I'd known before buying this board. I'm a bit surprised since I hadn't seen a clone romset in MAME. Sounds like the flip is dictated by the different ROMs, so I'm assuming no hardware mod would fix it.

I have a white Arkanoid board with the Taito logo etched on the board and a Romstar serial number sticker. I bought it off eBay and installed it into a Phoenix cabinet. Player 2 always flips upside down and is uncontrollable, but it seems none of the dip switches disable cocktail mode. They seem...