Search results for query: tube swap*

I picked up a cab with a 19 inch Phillips 19vlbp22 tube in near-immaculate condition- the problem is that the chassis was yanked at some point in time. Searching the forums I get the following info: - it's a CR-25 tube (or neck? new to monitor repair so pardon my ignorance) - it more than likely...

Looks like my heater is shorted on my WG 25" tube in my simpsons cab. I found a free 25" sanyo tv nearby that I'm considering grabbing to tube swap. How can I check compatibility?

My Arena pin has a fluorescent tube to light the translite. I've seen LED tubes are now available, but some require that you mod the wiring, ballast, etc. I don't want the tom foolery and bally hoo. I just want a bulb that pops in. Anyone done one of these yet?

Today's patient was a Time Crisis upright with a 27" monitor. The existing tube was a rehabbed unit from arcadecup and was looking quite nasty after a few years (smearing, fuzzy, needed cranked screen voltage to get consistent gun readings, no red) so the decree was issued for a tube swap before...

Just picked up this MK4 today. 32,000 credits played. All original. Works as it should except the monitor was all Red. Got it home, removed the monitor, and threw it on the bench for testing. Hooked up the B&K. Got everything setup and ran through the Emissions test. Sure enough, the Green and...

https://tubular.atomized.org/tube/A48ACB00X I'm not up on deciphering the information from the above website but it has a CR-23 adapter. It's out of a Zenith SS1909W TV I bought expecting a 100 degree tube but it sadly has a 90 degree tube. I'm not sure whether to keep the TV, sell it or...

Hey everyone, I have the chance of getting a cheap old Panasonic 19” wood grain crt tv, the tube is in good shape but the electronics are not and for $10 I was thinking of picking it up to atleast have the tube for a tube swap But I don’t know if the tube is compatible or not, the model of the...

Hey all. I was looking to find and bump an older thread to ask this question. But I couldn't find one. Figured I'd start this for my question today and for others looking to confirm tube swap candidates in the future. Anyways. I picked up this Sanyo 25" for free couple days ago and finally got...

So I rebuild a k7000 p538 chassis with new cap kit and flyback. I got an r25gygy television tube. I can't get the image centered on the tube. I can change the v pos pot to the max and still not centered, about 2 inches of black on top. The v height pot will Increase the image to fill the size...

Does anybody have experience tube swapping a medium rez K4900? My customer dropped his newly acquired Paperboy off a truck, necked the tube and completely destroyed the cabinet. The model number of the tube is 19VMJP22. Tubular.atomized is saying this tube is compatible with a K4600 tube we...

Getting ready to embark on my first tube swap. I have a K7000 P447 in my 1943 that has fairly bad burn-in of the attract logo. I picked up a couple 19” TVs from neighbors and dug into them today. One is a Sylvania model SRT2319 with a Funai A48LRH93X tube. The other is a Philips/Magnavox model...

I have got a question, have a ms9 in my astro city 2 with some burn in, recently picked up sanwa pm1745 for free, it has a samsung A68KVL74X01 and the tube is immaculate. Wondering if its a compatible tube and yoke for the MS9? Or will i have to swap the yoke out of my MS9 toshiba tube. Done...

Ok, so I recall reading some traffic about using a 90 deg tube in a 6100 and there being debate about it working or not. Mostly I recall a few saying it does but I couldn't find anything posted on KLOV that actually confirmed this with images. We know the 6100 and the Amplifone yokes are...

I tube swapped this K7000 monitor a while back and cant seem to get the geometry right where the dot hatch is evenly proportioned from the center to the edges. Would this be a focus ring issue?

changing yolks and tube? Took a chance and purchased a TV off Ebay for the CRT,,, tube #1 , Original game tube, #370ECB22 Missile Command Cocktail , tube #2 donor Samsung TV C3104MA, got a Samsung Tube #3701B22 , perfect. According to tubular/atomized, ""'its a match""configuration of pins...

Got a free 19vhbp22 tube, instead of it going into the trash. Tried to look up if it can be swapped into any specific monitor, or details in general. Not finding much. Anyone know much on the tube and/or if it can be used in another monitor?

Hi all, Just checking has anyone swapped a Ge 25ge240 tube into a k7000. Does it work any issues?

Hey guys, help me understand what to look for when determining if a tube is a good swap candidate. Does the tube's pinout match the chassis? Are the yolk readings compatible with the chassis? Am I good if the answer to both above questions is yes? Started thinking about this because I...

Hello, I've read a lot about this, and just picked up a Philips Magnavox 25in TS2544 C122 tv tonight. From what I can tell, this was the EXACT tube WG used on a 25k7401. Will this work on a 25k7191? The tube swap spreadsheet and another forum post said it would, but what am I looking for to...

So I've had a few extra 25" monitor frames lying around for a while from tubes that got necked over the years and decided to go Marketplace shopping for some replacement tubes. Found 3 televisions up for sale but only one person got back to me. So I went to pick it up for the grand total...