Search results for query: *

  • Users: D_Harris
  • Content: Threads
  • Order by date
  1. D_Harris

    Strippers and Crimpers

    I have a couple of HT-1921 Crimping Tools I picked up from Bob Roberts over two decades ago. Right from the beginning I was having problems with the rubber sliding off the handles, and I had to do a lot of repositioning and multiple presses in order to get crimps that were sometimes still...
  2. D_Harris

    For Videogame Hardware Designers/Inventors

    I'm interested in the experiences of arcade game entrepeneurs who have designed and built products to supplement or improve upon conventional arcade videogame hardware. Products including special game PCBs and other components like adaptors, converters, and hardware that connects to power...
  3. D_Harris

    Wood Replacement Question

    For those who have had to replace sections of wood on a cabinet, I'm curious as to the type of wood you used. Has anyone here used plywood on an MDF cabinet, or MDF on a plywood cabinet? Thanks. Darren Harris Staten Island, New York
  4. D_Harris

    Two Artwork Sellers

    Has anyone here had esperience with the art work from the Ebay sellers quartereatercabinets and ssdesigns2002? I already just received some Millipede art work from the former. That would be quartereatercabinets, who is the kirk Weaver known for selling pinball machines. I also just ordered...
  5. D_Harris

    Arkanoid: Revenge of Doh Vertical Issue

    Can anyone tell me what board components should be replaced on an Arkanoid: Revenge of Doh PCB in order to bring down the image position on the screen? the image has been slowly creeping upwards over the years. Fixing the problem via the monitor is not an option, because the screen image of the...
  6. D_Harris

    Arkanoid: Revenge of Doh dip switches

    Can anyone tell me what the Arkanoid: Revenge of Doh dip switch positions are needed to get 1 coin = 1 Play? I tried a lot of combinations and the info at Crazy Kong doesn't appear to be correct. I'd also be interested in knowing what board components should be replaced in order to bring down...
  7. D_Harris

    Tournament Arkanoid Spinner Issue

    Can anyone tell me if there are any PCB related problems known to cause intermittent spinner malfunctions. My friend's Tournament Arkanoid exhibits a problem where it will continually stop working for a split second. He'll restart the game and it will work normally for a while before the...
  8. D_Harris

    If it is too good to be true...

    Has anyone here purchased one of these? https://shethoshqfof.myshopify.com/collections/new-year-special/products/dhue?fbclid=IwAR3WFVHtKFfvHh_1xJ4LuOEIbuI5mcbJfBJZuvpquaXmHDEX03r8in4R-qs I'm curious about where it falls short when compared to the cocktail cabinets/games we normally deal with...
  9. D_Harris

    Star Trek Cabinet Question

    I'm trying to get an idea of what Star Trek cabinet options dominate collections, and which one is the most coveted. Of the four normal StarTrek cabinet options, which do you have? And which one would you prefer? 1) The Asteroids conversion 2) The Convert-A-Cab 3) The dedicated upright 4) The...
  10. D_Harris

    Bullet Proof Microswitches

    From experience can anyone tell me which microswitches they find to be the most durable and maintenance free? I thought I read somewhere it was Omron Reed switches, which I believe original Nintendo games like Donkey Kong and Super Mario Bros. Used. I ask because I have some aftermarket...
  11. D_Harris

    JAMMA adaptor harness extension & length

    Can someone advise me on whether a two foot long JAMMA adaptor (between a boardset and cabinet harness) is a.more plausible option than a JAMMA adaptor with two foot long extension harness? Would the extra connections of the later be much of a drawback? Thanks. Darren Harris Staten Island...
  12. D_Harris

    Cabinet Bottom Restoration

    Has anyone here done any repair work or restoration on the underside of a cabinet that had no structural issues? I ask because no one sees the bottom side of a cabinet (that hasn't fallen over). So any aesthetic repairs may seem to be a waste of time. Darren Harris Staten Island, New York.
  13. D_Harris

    Joystick Restrictor Material

    Has anyone here had to replace a joystick restrictor? What is your experience with the plastic vs. the metal ones as far as wear? I assume the metal restrictors would last longer, but there would be more wear on the joystick itself where contact is made. (Though I assume that either restrictor...
  14. D_Harris

    Tubes for Vectors

    Has anyone gathered into one place all of the tube numbers for tubes that have been found to be compatible with 100° vectors like the 6100s and G08s? From different threads here I've so far come up with the following numbers: 100° 19VLUP22 19VJWP22 19VJNP22(Difficult) 19VLNP22 ? And also...
  15. D_Harris

    Searching for Joystick Info

    Am I correct in assuming that the average diameter of an arcade joystick is 3/8" of an inch? And can anyone tell me the steel composition? Thanks. Darren Harris Staten Island, New York.
  16. D_Harris

    Frankenstick Project

    I have a Leland Viper control panel and plan to cannibalize the joystick handles to make a replica of a Mad Planets/Mach 3 joystick assembly using some Wico bases I have. (There is no way I'm spending in excess of $400 or $500 on one just to play Choplifter). Unfortunately, I've not been able...
  17. D_Harris

    Cocktail Cabinet Veneer

    For those who have restored cocktail cabinets, can you tell me if you used either woodgrain or what would seem to be the more desirable black veneer? And were the cabinets kept or sold? Thanks. Darren Harris Staten Island, New York.
  18. D_Harris

    Wanted: Used Leaf Switches

    I'm in search of as many leaf switches as I can get. The kind used on the old Williams and Midway joysticks assemblies and buttons. Even if the plating on the contacts has worn off I could still use them. Thanks. Darren Harris Staten Island, New York.
  19. D_Harris

    Wanted: Midi Under-Mount Trackball Plate

    Looking to buy or trade for a ZINC under-mount plate for midi(Millipede) trackball. Thanks. Darren Harris Staten Island, New York.
  20. D_Harris

    NEW Tetris Controls

    Can someone give me the specifics on what kind of joystick(Brand, model, restrictor info, ect) was standard on the Atari game Tetris? (Button info also). Thanks. Darren Harris Staten Island, New York.
Back
Top Bottom