Search results for query: *

Also for future referrence, I was advised by an operator to also try reseating all of the jacks that plug into the cpu board. A similar thing could be going on there with oxidation or poor contact with the board.

SOLVED - http://forums.arcade-museum.com/showthread.php?t=347491

SOLVED - I tried rotating the potentiometer back and forth with a screwdriver several times, and then tried again - now the claw is gripping again. So guessing there was some oxidation inside the potentiometer.

United Treasure Chest claw machine - claw has no grip after adjusting potentiometer Trying to get a project United Treasure Chest claw machine up and running. I noticed that the claw grip was strong making it too easy to grab a prize. So I adjusted the potentiometer (POT2 in pic attached)...

United Treasure Chest claw machine - claw has no grip after adjusting potentiometer Trying to get a project United Treasure Chest claw machine up and running. I noticed that the claw grip was strong making it too easy to grab a prize. So I adjusted the potentiometer (POT2 in pic attached)...

FYI, finally got the hasps off. What I ended up doing was surprisingly simple. I clamped on to the outside part of each hasp with a vise grip, then bent it out then in. After about 15-20 bends, it broke off inside, leaving just the slotted hole on the outside of the door and the welded on piece...

Awesome, thanks.

Thanks all! Since I don't have a grinder, I'll try to find the drill bit and give that a shot. I'll bondo/paint the holes as described afterwards.

I recently got a crane project machine which has apparently been vandalized. I'm trying to remove the hasp brackets on the coin door (see pics) and patch up the holes. Any advice on how to proceed? Thanks!

United Treasure Chest crane machine - need side window metal frame I have a United Treasure Chest crane project which has a broken metal side window frame (see pic). Does anyone have a replacement for the frame part available? Or guide me to a source for it? Thanks!