Search results for query: *

I have a ST Voyager that started showing not authorized every once in awhile. It now won't go away. I have tried to "re-seat" the security chip on the MEGA-jamma board dozens of times. At this point it won't go away. I have also "re-seated" the jamma board. What else can I check? Do those DALLAS...

I have an original Taito Elevator action that keeps blowing the circled fuse. I've been looking for the adapter to use a new switching supply but no one seems to have one in stock. Does anyone have one or know a place I can send this for repair? Thanks!

I am trying to convert a Midway Rampage to LCD. I am getting a double image when using a typical CGA to VGA converter board.... So I have purchased the "video timer chip" from Arcade shop that replaces the chip in 6H. I am still getting a double image.... any ideas? Thanks!

Hi, I'm looking to make my own custom wire harness for a Super Bikes 2. Does anyone know where I could buy the board connector ends or are they something only Raw Thrills makes? (See pics) Thanks!

I have a Super Punch Out. The manually shows the lower monitor plugs into the one outlet on the block, the florescent lamp in the other and the upper monitor in the black cord that hangs out. When I do that, I get no power to the lower monitor. If I plug both monitors into the block they both...

I have a Super Punch Out that has a "scrolling" white bar on both monitors. If I disconnect the bottom monitor video harness, the top monitor looks perfect. If I disconnect just the top monitor video harness, the bottom monitor won't even power on. Is this normal? Maybe I'm missing something of...

I have a dedicated Tokyo Drift (RED) with a Dell PC in it. I can not get the steering motor to work. The motor is good (tested in another cabinet with Microtel PC). The fix was the fuse on the amp board….. I metered it and it had continuity but it must have been just not letting enough voltage...

I just purchased a Vector Labs Punch out 4-1 selector to switch between Punch Out and Super Punch out. PO sounds great, but SPO out has no voices (very very faint I can hear "Canadian Bear Hugger")... (Crowd noise is normal) I know my SPO board is ok because it works plugged in normally. Any...

Looking to buy a working Star Wars cockpit with 25” monitor somewhere in the Northeast.

Hi, today I turned on the Star Wars and have an issue with the screen and hoping someone can help. It was working perfect for years and now I get a box outline and some line drag.. The green characters fill the screen and look ok. Any idea what to try first? Thanks!

I'm looking to buy a Star Wars cockpit sit down in good condition. Something in the northeast. Will pickup. Thanks!

Hi, I have a Spy Hunter that shows me a garbage screen at startup (see pic). It usually takes a few minutes and eventually the game will come up and plays normal. Any ideas where to begin to troubleshoot? Thanks.

Hi, I picked up a working 1996 Williams League Champ Shuffle today. I'm looking for a manual. I'm new to the shuffle world and figured I start there. Any help with best place to find parts etc. Thanks!

Hi, can anyone confirm that a MTG-2901CN monitor will work with a 60-1 multicade board? I have it connected but can't get it right. I have the RED, GREEN, BLUE, GND into the top 4 pins (see pic). I have the white "sync" wire in the bottom neg. V/S pin. The multicade board is set to CRT not VGA...

Does anyone know the difference of some of the model S CPU's? I have a SBC-1-B-SP31B that needs replaced. I see different models listed online. I see SBC-1-A-SP31A, also SBC-1-A-SP29A. I can't find any info on the different versions... Thanks.

I just picked up a Skee Ball Model H. Everything seems to work as it should but sometimes the ball release solenoid won't release the balls. I ordered a new solenoid and it still randomly won't release the balls. I can usually unplug/plug the whole machine back in and it will work again for...

I have a 1983 Star Wars upright that the monitor is bad. I'm going to send the chassis out to be rebuilt but I was wondering what other options I have. Will any other vector arcade monitors work like asteroids or something else? Thanks for your help.

I just picked up a 1983 Star Wars game Monday and it won't completely turn on. I get a white dot that flashes on the screen and the machine sounds like it's stuck in a cycle. Almost like it's trying to come up but keeps resetting. I removed all the boards and reseated the connectors. The 3 LED's...

I have a Wells 25K7401 25" Monitor that the chassis was rebuilt about 2 years ago. It sat in a box until yesterday when I hooked it back up to my tube. Previously my tube colors looked good. Now I have no reds. I can turn up the red bias and get a red screen but during normal game play reds are...

I have a 60-1 board that I'd like to install a trackball. I have a HAPP trackball with the red circuit boards. I've connected the harness from CON3 on the 60-1 board to the trackball and I tested my +5V on the trackball. Everything looks ok but in the test mode, the cursor doesn't move very...