Search results for query: *

Atari Star Wars (plus ESB) Upright Vector Good shape! Must sell due to move. Have others as well. Buyer Must pick up or arrange shipping. http://www.ebay.com/itm/Atari-Star-Wars-Upright-Vector-Video-game-WITH-EMPIRE-STRIKES-BACK-/111928002890?

OK...got a non working WG6100 with a P314 def. Board that has a chintzy little Atari labeled input protection board. The diodes at one end 4148/1n914f were crummed up and I replaced a broken 914 with a 4148... got it up and running after a full recap and I get a weird picture with a collapse up...

OK, sorry, but I can't read my schematics copy, and I can't find it in the FAQs, but what are the specs/part number replacements for Q700-Q701 (I think they're both the same NPN transistors)...seems like I can see a 127 on one of the "smoked" ones...can anyone help me with a suitable pn...

OK...Q900 in a wells-gardner HV unit is apparently a thyristor or some sort of "weird" atypical semi. I am getting readings that seem to indicate that pin 1 is actually the base, when I'm used to the center pin being the base obviously on most transistors... Forgive my ignorance, please, but is...

OK... getting tired of moving monitors around! Does anyone have any premade 3-infinity feet (12pin??? I'm not sure) extension cables for working on wells-gardner monitors (or others) "out of the cabinet"? If not, does anyone have sources for the male and female connectors and harnesses so I...

OK... update: last night I fried all the transistors on the chassis of my WG6102 after observing a slightly fluttery picture for about 2 minutes, with transistors that melted the insulators!!! After this, found a bad diode at D702. Replaced it, replaced all the burned out transistors, and...

NTE49 transistors needed, 2-10 acceptable. Sources appreciated...

Tempest game now running...found a new HV board and recapped and found a failed resistor and a shorted chassis transistor. Now I have an image, but there is a HOT smell---VERY---and the screen edges are "jittery"...as well, the defelection transistors are VERY VERY VERY hot...cannot touch them...

OK... I know this should be basic, but I've rebuilt my WG6102 monitor (with P314 deflection board and p339 HV board) and checked the main transistors 3-4 times and I STILL get ONLY a bright spot in the center of the monitor with all colors... I know I've got to be missing something simple, and...

OK, so I've got two WG 6100 series vectors that I just haven't found time to repair. I would like to find a service where I can ship them for rebuilding at a reasonable rate. If it's too expensive, I'll just have to make the time... Anyone have any sources that still do this? I called...

I have several classic PCB's where the traces and points are lifting and not allowing good soldering. Of course I can make jumpers, and have, but I would like to have some backup boards made. Anyone have any ideas??? I'm specifically looking for monitor deflection and HV boards for vector...

I would like to be able to test rebuilt Vector monitors on the bench. I'm back into rebuilding after a few months off...amazing how quickly that stuff leaves you!... Anyways, of course I'm aware of pattern generators for raster monitors, but is there a way to test vectors "ex vivo" (out of the...

Working WG vector/x-y 6100 series monitor requested... thanks!

OK. I worked on this several months back, and I got some help, but got frustrated and left the project, so I'm starting over new. I bought a nice Star Wars Vector and it was working before I moved it. After the move, I was getting an INTERMITTENT bright center spot (WITH some of the "normal"...

Would like a backup boardset (at "lower than ebay" price!) or would take an i/o board only if that's all you have.... thanks! email [email protected]

I get an intermittent increase in brightness sometimes while playing this game that causes all retrace lines and a central spot to be visible. I can sometimes make it go normal after shutdown, but most often it just stays the same, EVEN IF I TURN THE SCREEN/BRIGHTNESS ALL THE WAY DOWN, OR IF I...