Search results for query: *

Atari Star Wars (plus ESB) Upright Vector Good shape! Must sell due to move. Have others as well. Buyer Must pick up or arrange shipping. http://www.ebay.com/itm/Atari-Star-Wars-Upright-Vector-Video-game-WITH-EMPIRE-STRIKES-BACK-/111928002890?

yep, Cleverlyj...found in an updated FAQS that the schematics left out the specs for those transistors and they are the same... thanks!

OK...got a non working WG6100 with a P314 def. Board that has a chintzy little Atari labeled input protection board. The diodes at one end 4148/1n914f were crummed up and I replaced a broken 914 with a 4148... got it up and running after a full recap and I get a weird picture with a collapse up...

or a PN3569? thanks all!

anyone able to verify that an NTE194 or a 2N5551 would work in these positions? thanks!

OK, found an errata in one of the faq versions that says that Q600-602, Q700-702, and Q800-802 are all the same TPS98 NPN transistors. Can someone verify this? Also, what would I be reading as a 127...? Is this a good substitute, or is there some sort of modern "upgrade" for these circuits?

OK, sorry, but I can't read my schematics copy, and I can't find it in the FAQs, but what are the specs/part number replacements for Q700-Q701 (I think they're both the same NPN transistors)...seems like I can see a 127 on one of the "smoked" ones...can anyone help me with a suitable pn...

these are made in Italy...but you're right about there being no really good "standard" on these things, which confuses those of us who don't know all the numbers by memory!!! Thanks all!

good...that's what I figured! Thanks for the verification!!

OK...Q900 in a wells-gardner HV unit is apparently a thyristor or some sort of "weird" atypical semi. I am getting readings that seem to indicate that pin 1 is actually the base, when I'm used to the center pin being the base obviously on most transistors... Forgive my ignorance, please, but is...

OK... getting tired of moving monitors around! Does anyone have any premade 3-infinity feet (12pin??? I'm not sure) extension cables for working on wells-gardner monitors (or others) "out of the cabinet"? If not, does anyone have sources for the male and female connectors and harnesses so I...

OK... update: last night I fried all the transistors on the chassis of my WG6102 after observing a slightly fluttery picture for about 2 minutes, with transistors that melted the insulators!!! After this, found a bad diode at D702. Replaced it, replaced all the burned out transistors, and...

All I can find on the crossref. is NTE49...I don't know of any other part number, so I assume that IS the original one...

No...cannot find them online anywhere. According to NTE, they're discontinued, and no other vendor has them at all...

I have the "straight" P314 boards without the P327 piggyback upgrade... I've measured the voltages on Jeff's board, and was getting ready to measure the chassis transistors before they blew...all that I got to were as they should be... thanks!!!

OK, an update and another plea: Image went to central spot after being on for a few minutes. All x-y deflection transistors were cooked, and 1 of the z amp transistors.. Also, Q603 and Q703 are dead, but I don't know if that was the CAUSE, or if it was an EFFECT of the "blow"...Since these...

NTE49 transistors needed, 2-10 acceptable. Sources appreciated...

Tempest game now running...found a new HV board and recapped and found a failed resistor and a shorted chassis transistor. Now I have an image, but there is a HOT smell---VERY---and the screen edges are "jittery"...as well, the defelection transistors are VERY VERY VERY hot...cannot touch them...

yes...it'll play blind....

I'm testing with a Tempest that I know to have been working before the monitor went. Spot killer LED is NOT on, and my voltages all read nominal...