Search results for query: *

If you have another megatouch that is identical, I would start by swapiing just that board first. If it turns out thats only that board is bad, then you can either replace the board or try replacing the yellow capacitor and looks like two resistors were burned up aswell judging by the pics of...

@ i believe $8 grand,(used quote i got) i havent seen too many either. Other then that, All i see is touchtunes and the old rowe CD-100's with the jump kit installed. I actually would like to get a used jump kit. I really only need the drop in bezel, but if the price was right i would buy the...

Off the top of my head, AMI's NGX. Bose's touchtunes are still using 4:3 standard as far as i know. Anth there maybe others in different countrys that im not aware of.

Thats interesting. Ive replaced probably 20 touchscreens and never accidently installed one upside down. I actually never thought there was an up or down, just a front and a back. So if what you say is true, then what are they doing with those vertical 16:9 jukebox's?

Actually, when you recalibrate you tell the controller what is up,down,left,right. And he said when he moved the cable it responded which im almost sure is a broken/loose connection at the base of the glass.

It sounds like one of the wires going to the glass might not be making contact. Some touchscreen revisions use wires soldered to the special coating, and some use a flat cable with conductive material. I have seen a few that have wires soldered, the wire either ripped off at the solder joint, or...

I bought an old megatouch gold for $50 on CL a few years ago. It came with a bill acceptor that i sold for $50 on ebay. It came with envelope that had a bunch of coins and some old software rom chips and memory sticks and a manual. Inside the manual I found $60 worth of $1's and $5's. I then...

There is a few types of inverters merit used depending on what brand LCD. It sounds like you have the Kortek model. Since the inverter in that model supplies power to the lamps and the display controller, theres a possibility that even if you figure out a way to power the backlight, you may not...

That inverter will not connect to the OSD or display controller. The one he is looking for has 12 pins, the one you listed only has 6 pins.

I posted in your other thread if you want to check that out. But about the inverter you bought, you may get lucky but you need to find out what brand/model the lcd is and get an inverter that is compatiable with that brand/model. The biggest problem is that the OSD needs to control the lamps...

I could sell you a direct replacement lcd for that price. Geez $150 for just the inverter board is nutz. I hope you didnt buy it. And again sorry for late reply i dont frequent this board often and things get burried quick.

I dont know why you want a jade 2 key that bad but here is a link to that key and hard drive but for the cost you are better off upgrading to newer soft/hardware...

I have the 15" ION EVO and want to upgrade to the 17". I am told the front bezel's are interchangable between models. Of course i would need the 17" mounting bracket aswell. I would also be interested in trading my 15" front bezel, and if needed, along with the 15" LCD panel (which is in mint...

Wow thank you very much sending you a PM with my address now.

Considering force systems final upgrade was 2011 i doubt prices will go down anytime soon. They will probably stay at retail price or higher until all force systems are replaced with ION or newer systems.

I recently picked up a broken megatouch xl with what was thought to be a bad cdrom drive. But turns out that the cd disc has some kind of dark spot inside the disc that can not be cleaned off. There is not a single scratch on the disc. I put the cd in a pc and is detected but when trying to copy...

Why is there a Fusion bios logo? Only logo i have seen on force units is FORCE logo. Also did you figure out what the problem was. You could use a standard pc power supply to see if thats the problem before buying the one that fits although if its old your probably better off replacing it...

If your not getting any lights on the OSD board then I dont think its the LCD screen. Its probably the power inverter board on the back of the LCD. I just joined KLOV so sorry if you this reply is too late.

Ebay seems dried up on ion 2009 software keys. And 2011 is too pricey for my wallet. Anyone have 2009 they want to sell? If your price is reasonable PM me.