Search results for query: *

Hello, Is there anyone out there that has an EMPTY Golden Tee pedestal for sale in the Huntingdon Valley 19006 area? Preferably a chopped iT cab? I have the computer and everything else . Or does anyone have a decent set of plans or a google sketch file that they can share to build a...

I know this thread is old, has anyone found a decent set of plans / google sketch file they are willing to share?

I was just playing around with it. If you enter cd 7601 it will attempt to grab cd 77. I made sure all disc were in the proper trays. I am assuming it’s something with the gripper. Not sure how to adjust it

Hello, I have an NSM wall mount Performer, when I select a cd and track the caddy moves up to the correct CD location and attempts to pull the CD tray. The tray usually comes out about half way then shoots it back into the holder. Does anyone have any information on how to adjust the...

Hello, I am shopping an Arachnid Knock Off. Looking for a replacement "rubber band" that is under the monitor and causes the puck to come back. Also looking for a copy of the software in case my hard drive goes down. Thanks!

Hi, The following items are for sale. They are located in a warehouse in Bridgeport, PA 19405 Please call Steve @ 610-828-3837 for further information. Not interested in trading or shipping any of the machines. LOCAL pickup only Pictures can be viewed on this craigslist ad...

Hi, The following items are for sale. They are located in a warehouse in Bridgeport, PA 19405 Please call Steve @ 610-828-3837 for further information. Not interested in trading or shipping any of the machines. LOCAL pickup only Pictures can be viewed on this craigslist ad...

NSM Firebird for sale $150 - Located in Philadelphia, PA 19114 The jukebox is complete but the player needs to be rebuilt or replaced. Its showing error 61. The title pages are moving smoothly. Good for parts or easy fix if you have a spare player.

I was playing with the box last night. I added a new time keeper ram chip. Ran the command P160 to initialize all CDS, All CD's are grabbing and working except for 97,98. I swapped the whole tray assembly and they are all working now. Trays 97-98 on the old one must have been bent or...

If the screen is displaying "31" that is the MAX volume setting

Hey Ed, I will take a youtube video soon and post a link on here. When I select a CD the mechanism slides up to the proper slot stops and attempts to grab the tray. It does not grab the tray and then slides back down to the player. and flashes error 61. That NSM tech gave the wrong...

I called NSM tech support. Apparently they were bought out by ROWE but they are still around for another day or two via phone. He suggested adjusting an acorn nut to raise the grabber a little bit. I will try that out later

Hey, Finally had a chance to mess with it. I took each cd out and placed it back in to assure they were lined up correctly" Still have the same problem. It will pick up some cd's from the right tray but not all. and it gives error 61. I took the whole right cd holder out and placed a...

Thanks Ed, I will try that. I have never seen "lock tubes" These just had tape to hold the cd's in place. *Also on another firebird when selecting a song the CD tray lifts up about 1" and goes back down. The path is not blocked, I even tried it with the cd trays removed and the same thing...

Hello, Working on a few NSM Wall Jukes (FireBird I) and a (Performer) I am having some problems with the cd changer. On the performer it will grab all CD's on the left tray (1-50) without problems. The right tray (50-100) works randomly but most times not grabbing anything. I think it may...

Thanks for the info!

Hello, Has anyone out there used this lubricant on an NSM CD Jukebox? The title pages are moving slow on my machine. Not sure if this would be helpful ? Thanks

Thanks for the advice. The problem appears to be where the power cord connects in the back of the machine. I took the wires and off and connected another switch and it is working.

Hello, I have a firebird II was working great and all of the sudden I lost all power. I checked the power cord and it is good. When I hit the power switch I get nothing at all. Do you think it is the transformer or something with the power supply? Or could it be something more simple like...

So I don't think it is a compatibility issue. I have tested all three keypads and now the only buttons that work are the 3,6,9,H When I press any of the other buttons nothing shows up. Seems like there may be a problem with the board. This performer doesn't have an ES-V board so I don't have...