Search results for query: *

My donkey kong does not have any audio. The game worked great for a while but then this problem came little by little as the audio quality got worse and worse. It took a few days for it to completely go out but now there is nothing at all. I've read a lot of articles and most seem to suggest...

Ms. Pacman shows 2 overlapping screens, video link included I'm not sure if this is monitor or game related. The audio works, and you can kind of play the game if you know the layout of the maze, but its very difficult because the screen shows 2 overlapping screens. Here is a link to the video...

I've decided to restore my Addams Family as best I can. It's a good machine but does have some issues. Previous owner was an idiot and in several places replaced original screws underneath with ones that were to long that poked through the playfield. There is quite a bit of scoop wear especially...

I tried very hard to sell this machine locally but no one would bite on it so I had to list it one ebay. Here is the listing: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290473364559&ssPageName=STRK:MESELX:IT Its a $.01 starting auction so it goes for what it goes for. It's in very...

Atari Breakout Machine available in West Chester, OH (Just north of Cincinnati, OH). Machine looks, sounds, and plays great. Cabinet is in very good shape. A few scratches in the side art but that's it. Monitor is nice and bright. Comes with extra non working board, a few extra potentiometers...

I'm working on a supposedly good monitor for my Donkey Kong but I cannot seem to get the picture centered. This is about the best I can get it: Is this the horizontal hold pot? The Horizontal centering pot is new and seems to be in check. The screen is sagging in the middle and I cannot...

I' dont know if this monitor is hopeless or what. Anything that I know of to replace has been replaced: HOT Q901 and IC601 twice Full cap kit Filter cap Audio cap kit with transistors All adjustment Pots Flyback Transformer And I'm not getting anything. Granted this IS the monitor that...

Sanyo-20EZ WTF?! is there anything left to do?! FML... Ok so here's what I've done to this monitor: New Horizontal Output Transistor Full Cap Kit New Filter cap New IC601 New Q901 New Neck board POT kit New adjustment POT kit New B+ Voltage POT New Flyback Transformer and I'm STILL GETTING...

Today I received a G05-Cap Kit with transistors form Bob Roberts, the only thing is the transistors are huge. I'm a little confused here... Do I affix the new giant transistors to the heatsyncs of the little ones and use wire to attach them to the board? Seems like a little much; especially...

Asteroids Deluxe Monitor Fold over? Only half monitor showing. G05 So yea, what the title says; only half the monitor is showing. It appears that the upper half of the monitor is all being compressed into a line in the middle of the monitor. This section: Compressed into this line. The...

I'm trying to rebuild a DK Sanyo 20-ez Monitor and am wondering how to test the Horizontal Output Transistor. I pulled it out of the the circuit and am testing the continuity. On the HOT with the meter in diode checker mode: Between the Base and Emmitter, either direction I'm reading "069"...

Donkey Kong Monitor just went black... No neck glow :-( This particular machine was purchased essentially dead. When you would turn it on the monitor would show one of a variety of things. A blue screen, blue and black snow, etc. When I plugged a new board from Mikesarcade.com today I...

Donkey Kong Board Wiring; Second set of eyes please? So Donkey Kong is my first Nintendo game that I've owned and I've never worked with a game that didn't utilize a single edge connector. I just got a good board from Mikesarcade.com and I want to make sure my wiring is correct before I power...

First off I read through the pricing inquiry rules thread and I'm pretty sure I'm not breaking any rules. I've been in the market for a Battlezone but personally I prefer the non-parascope version over the parascope version. I found a guy down here who said he would consider parting with his...

Dot Matrix Circuit Board Components; can they be fixed? I had a problem where my dot matrix screen went out on my Jurassic Park pinball. I went through the power supply and ended up needing to replace a transistor, 2 diodes, and a capacitor. When I powered on, there was just some static on the...

So here's a photo of my Gallag Board: I believe it's the post 2000 version with the Jamma connector. Then there is a converter going from the original wiring harness into the jamma board. There's one thing missing though... Isn't there supposed to be a rapid fire board where those 4 screws...

Galaga or should I say Gallag. Wtf? Oh well new game Yesterday I went and looked at a Galaga machine and the guy told me the previous owner had replaced the board. This was obvious because of the jamma adapter and the fact the board didn't fit in the original board holder. After some serious...

I'm looking through the Galaga manual and I cant seem to find anything on this. On an original Galaga, can you continue your game from where you died by entering more credits or is that only on the Galaga/Ms. Pacman reunion game? I know I've done it on the reunion machine but I dont think I've...

Is it possible to get side art stencils or do you just have to make them? I'd like to replace the side art on a Ms. Pacman but I don't want to buy adhesive side art, I'd like to repaint it. Does anyone make it? Is there a place you can buy it? Thanks!

Ms. Pac Man Monitor Issues, Just cap'ed but still need help I cannot seem to get this Ms. Pacman monitor right. First off can anyone tell what kind of monitor it is? I mean I suppose it should be an Electrohome GO7 but I cant seem to find anything that indicates that. I just cap'ed the...