Search results for query: *

I got this Asteroids Deluxe a little over half a year ago in non-working condition. I've worked on the monitor to get it rock solid, rebuilt the power supply, capped the game PCB, and did general maintenance on solder points, etc. It could use a polishing of the top glass, and the rubber gasket...

Looking for Demon's World / Horror Story by Toaplan.

Solved: Poor connection in one pin of monitor chassis, likely acting as harsh current limiter I got an Asteroids Deluxe locally for a decent deal, in "working, but needs work" condition. That is, the monitor actually worked, but after ~10 minutes would fade out. When I got it home, it played...

I just want to know if anyone else had the pleasure of owning a sweet custom "MAME Platypus" from somebody on the east coast. Long story short this fairly rare cabinet has been maimed pretty bad. Adding insult to injury, the wiring is legitimately dangerous. Everything is twisted and taped. No...

I'd like to get my hand on a 6P X-men PCB, and do a composited widescreen setup with a CRT Projector, like I did last year with Darius II. Because of the fragility and value of these boards, I'm not interested in borrowing one for this - I'd like to have it under my possession.

SOLD. I picked up a Blast recently, and spent a few nights giving it some TLC and re-mounting the Wells D9200 monitor to the best of my ability (when I got it, it did not sit correctly, and stuck out). More details in my CL post here...

I've got a 27" K7401 in great shape, located in Fremont, CA. It's been recapped and is ready to go. Pictures coming shortly.

Looking for either of these games.

Just finished a tube swap and recap of this 19" wells monitor. Asking $120 local-pickup in the bay area.

Clearing out the pile; feel free to make a value or trade offer. Working Boards: $80 Street Fighter 2: The World Warrior B board: Fully working, original ROMS except one that was replaced after physical damage. Works with no issues on a good A board. $75 Three Wonders: Bootleg PCB featuring...

I have a K4900 I've reworked with a new tube and everything, while a friend has a Ms. Pac-Man with a dead monitor. I was thinking this would be a great match, except this K4900 is the "native vertical" type, which I think you find in Sinistar and a few others. At a glance, Ms. Pac seems to take...

Donkey Kong / Donkey Kong Jr / Mario Bros official JAMMA PCB This is the official Nintendo / Namco / Cosmodog JAMMA board that plays all three of these games. It was used in 2003 in a combination cabinet produced by Namco. The rotation is "standard" counterclockwise rotation, and yes - Mario...

I got a 19" Wells Gardner vertical raster monitor recently, intending to put it in my Centipede, but I saw the mounting tabs didn't match the original cabinet and did not want to cut up the mounting area if I did not have to. I got this monitor locally, under the impression that it works, but...

I picked up a 27" K7401 (2774) recently hoping to fit it in a Japanese cabinet but while it mounts properly, the tube curvature does not match so I can't really use this. The monitor looks like it has not seen a lot of use and is in great shape. Hardly any dust or dirt on it. No burn, and it's...

I got a Centipede recently and have been cleaning and fixing it. With the mikesarcade 2 1/4" trackball rebuild kit, the trackball does not roll well. The rollers seem like they are not as thick as the originals, and aren't making very good contact. I may try another kit. Periodically, I'll...

I'm not in the mood to build a Dualsystem wiring harness if I can avoid it. I have a working power supply, both monitors, and the VS System PCB, and it's all just waiting to be wired up.

My Joust's main board stopped booting one day, to either a solid blue screen with some garbage, or no image at all. No numbers on the ROM board. I'd done the 4164 RAM conversion ages ago so the CPU board runs just on 5V. I don't feel like debugging the board right now, so I bought a...

I've got a Nintendo VS Dualsystem cabinet and the control panels are unpopulated. Joysticks are taken care of, but I have no buttons. Looking for four black buttons, four red buttons, and eight of the small red start buttons. Trying to avoid the pricy replacement options, but if it comes down...

I got a big lot of these, and have been repairing them. Here are two that are working for sale. All ran for hours without issues and pass the boot-up tests. One worked as-is out of the box, and probably the seller didn't test it all the way. The other I had to reflow the SMD ICs and repair two...

Got a Midway Galaga PCB recently, and did some minor repairs and now it's 100%. Looks great, sounds great, plays great. I tested both player's controls as well as the cocktail cabinet flip feature. * Replaced missing PROMs (one is salvaged but original!) * Repaired some broken resistor packs *...