Search results for query: *

Been a while since I had to post here. I figured this would be the best place for it to be seen. I have a cruise in the world but I think the board is bad. I put a new power supply but every time I go to select the courses game freezes up. Voltages are OK on the power supply and going to the...

I have a client hat had a Rowe cd -100h that has no power . It does light up and then I'll acceptor has juice but that's it . No lights on the boards nothing . I tested it and all It has is the high voltage but no 5,12,24 volt . I am not a jukebox guy. I assume that the power supply took a dump...

Just like it says . I have a customer with two need for speeds and one of the harddrive a failed and neither game has a recover/boot disk.

I have a 2009 golden tee pedestal and want to upgrade it to a 2013 or newer putt putt version or golden tee with the hdmi upgrade . If anyone has one for sell hit me up . I really don't want to drop the coin to get the 2016 kit . Thanks everyone .

I have work for someone that is great at diagnosing and rebuilding arcade monitor chassis. I own an arcade tech business in central Fl and need someone I can rely on that has a good turn around time . If you are interested or know someone that is , please contact me here or through my website...

I went out to service a 2013 that was dead. I tested the power supply and it was toast .I replaced the power supply in the pc as well as the power strip in the cabinet and it is instantly blowing the small 250v fuse that is in the plug connection. If I disconnect the power going to the pc power...

I have a customer that has a like new condition coin op version 2010 golden tee pedestal . She what's to get rid of it and I want to make her a fair offer . What's the value ? I'm not sure if the monitor comes with it or not yet . Thanks guys /gals

Cga to VGA conversion gets brighter and brighter ???? I am at a loss I've tried two different cga to VGA conversion boards on two different cruzin worlds and both of them won't work right . The problem is that the image starts off great and then it slowly gets brighter and brighter until the...

Had a customer drop off an SS Charlie's angels pin addam having issues with the coindoor switches . The owner had it rigged to when you pushed in the coin return button it would hit the credit switch. However when he dropped it off it was stuck in a slm tilt and the H rom was hot as hell to the...

I need a complete plug and play set for a gauntlet legacy . I can't get the current one to boot and am tired of troubleshooting it . I've already added a new chip at U18 , a harddrive and reset all the chips but still nothing . So if anyone has a working gauntlet legacy or dark legacy please let...

I have a customer that has a gauntlet legends and I recently replaced the harddrive with a new one . Anyway I get a call and get there and the screen is a solid bluish green and the digital code stays at 8. . The hard drive only works with the cable detached . I've pulled the boards , cleaned...

Hi guys I have a customer that needs a golden tee fixed in this location . He will pay for your time . Unfortunately I'm in Orlando and have no way of getting to him . If anyone knows a tech or can help this guy out please let me know . Pm me so I can exchange more info . Thanks guys and have a...

Im looking for a couple of WG chassissss. I need a nice 7401 or more technicaly WGM2574-u4gs55h. The other one i need is a WG2550 0 4gr606. If anyone has either one of these or both please let me know . Ready to buy ! Thanks gusy

Hi guys i have a HS that i am thinking of selling . I really dont want to but my dog is not good and could use the money. The game is in over all really good shape . There are a few slightly raised inserts adn a wear spot by one of the pops . the game plays great and the cabinet is in great...

I have a almost perfect new Madden season 2 4player cabinet . It only has very minor scuffs on a few spots of the tmolding and 2 small nicks in the front of the control panel above the coin door. Anyway some things have come up and i need to let it go . I also have a Blitz 2000 gold edition in...

I got a call to fix a Artic thunder and found that the hot was dead. So i pulled the chassis and noticed alot of the board is shot . there alot of burnt spots on the board and previous work that was done by someone else that wasnt that good at soldering. There are several spots were the traces...

Would bad c4770 cause only the red not to work? I have a wellls gardner in a madden season2. I have blue ,green ,yellow but no red . it just shows as a dark gray. Im stumped on this one . i know that the 4770 is controll the high definition color display. but i would think if this is bad i...

Jus picked up a madden season 2 and it needs a new marquee and the curved plexiglas . If anyone can get me one of these I would be great full . Thanks and have a great day

Just as it says . Just picked up a reunion cab and need the left side artwork . If anyone has just the left side or know where I can get it please let me know . Thanks guys

i have a burnt up resistor at location R762. what resistor goes here? its so burnt you cant see the lines. it looks like some solder drips fell underneth it adn burned it out . Anyway looked for it on WG website but came up with nothing.Thanks guys