Search results for query: *

I just picked up a Frankenstein monster, Asteroids Deluxe cabaret with a vertically mounted Sanyo AZW color monitor and running a bootleg Ms. Pacman board. The pictures of the cab in the ad showed the game running, but I didn't try powering it on when I picked it up. It also has fairly bad Ms...

I recently bought 3 Merit Pit Boss bar top games with CGA monitors. One's a 10" Hantarex MTC 9000, and is the first I've ever had. Before I order a cap kit, does anyone with Hantarex experience think this issue might be due to caps, or maybe something else?

Untested Vectorlabs switcher and adapters. PCB is capable of switching between 4 games but the ribbon cable that's included only supports switching between 3 games. There are only 3 power cables included as well. You would have to make or buy one more power cable as well as a replacement...

Untested JAMMA switcher. Comes with main board capable of switching between 8 games. Comes with 5 remote boards and only one 40 pin ribbon cable. Also comes with documentation for the v1 and v1.4 main boards, although the main board for sale is a v1.2. :unsure: Untested because I'm...

My asteroids board has an issue where the width starts out about 1/3rd the size is should be, then it slowly grows to the correct size over about 10 minutes time. I've put a different game board in the cab and do not have the issue, so pretty sure it's something on my game board. Does anyone...

I'd love to get either a scan or actual used CPO to scan to be altered and printed for a custom control panel. I just need the large flat piece, not the raised portions with joystick and button art. I've seen a NOS CPO for sale from the company that bought out a lot of the late Atari parts and...

If anyone has scanned a War CPO, I'd love to get a copy. Thanks!

I've just pulled the chassis for a complete cap kit and thought I'd ask if anyone has seen this problem to help me narrow down what I'm assuming is a cold solder joint. When the monitor was in the cab it worked OK but any bump or even slight tap to the cab would cause the picture to briefly...

So what's the deal with the CPU's in the Tsunami TsuMo motion cabs and MEGA upright kits? I haven't found much of any info other than what turns up on a search here. I just got a Tsunami Mega kit in a Midway cab and am trying to get it to run. It didn't come with any restore discs, so I'm...

The Omega Race cab I have did not come with the background artwork, although the side pieces were there. Since I had taken pictures and measurements of the back artwork years ago when I had a different cabinet, I decided to try and make my own replacement. I bought some florescent powdered...

Just got my OR upright running. I just need the back artwork piece, I have the sides. Thanks!

Although the Omega Race upright I just picked up is the third one I've owned, I'm still not sure of the proper way to ground the coin door and control panel. It's been about eight years since I last owned one and my photos of the previous cabinets don't help me. I have a green and yellow...

In May of 2014 I was working on restoring a Tron. I aquired a partially working board set but while I was working on the cabinet I managed to also find a complete working Two Tigers conversion. I gave away the worse of the two Tron cabinets, and got the good one up and running. I later sold...

I'm assembling the last of the parts I need to get my Asteroids Deluxe cabaret completed. Joeycuda doesn't have the bezel for AD listed as one he makes, so I was wondering if anyone could take some measurements of theirs. Once I get a monitor in the cab I can try to make one and see how it...

I have a Juno First board with no audio. I'm working on repairing it, but it's missing the heatsink. The amp is a LA4460 and the heatsink looks the same as on a few other Konami boards. I'd hate to buy a whole board if someone has just the heatsink with bolts they could sell me. Picture of...

I bought an untested Juno First boardset and while verifying the eproms I found 3 chips with 1 folded over pin each. The pins either broke or were very close to breaking after I tried to straighten them. After burning new 2764's I ended up with what you see in the video. I thought maybe the...

ColorDMD just released a rom file for Dr. Who support! I installed the kit this week and loaded the rom last night. It looks great! 5r-tIM1ZypA

Anyone have pictures of a remote voltage pot mod on an arcade switching power supply? Is it as easy as opening the switcher, removing the pot, adding wires to extend the pot to a project board somewhere easy to access? It sounds simple but I haven't seen any pictures of it being done.

Just finished a flyback, cap kit and header reflow on a K7000. I was missing red before rebuilding, still missing it after. I do have horizontal flashes of red now. Anybody seen it before? Rejuve? http://youtu.be/CNNT0uZ-KnI

What's the deal with Neo Geo power supplies with no +5v adjust? I've been trying to find info online but I don't see much. My 4 slot is about 4.8v at the edge connector and I don't know whether to just buy a replacement, install a 'standard' switcher off the 3 pin A/C pass through Molex to...