Search results for query: *

I want to perform a cap kit on this monitor but the part number label has been ripped off for some reason. I’ve been able to glean that it’s a wells Gardner 25”, perhaps in the K7000 series. Can anyone help me out?

I picked up a Baby Pac-Man about a month ago, and have been refurbishing it to the best of my ability. The monitor is a Wells-Gardner K4800. It arrived in okay shape already, but after I did a cap kit, the picture was actually pretty great. An issue I noticed that was *not* fixed by the cap...

So I have a Nanao MC2000-S inside of a Zaxxon cabinet. There is no picture immediately after it gets powered on; however, if I wait about an hour, the picture gradually comes on (with some flickering), and then reaches full brightness. I've done a cap kit and that didn't fix it. Does anyone...

I know the 60-in-1 boards can be garbage, but I'd like to salvage the one I have without having to buy another. So some backstory... About three years ago, I bought one of these from a fellow KLOVer and it worked fine, but maybe two years ago, I started having picture issues. The colors would...

I'm working on a Nanao MC-2000 monitor inside a Zaxxon cocktail that I converted to a 60-in-1 (don't worry, the conversion is undoable). Ever since I procured this machine, the monitor has always been a little flaky. The image was always very dim and would take up to a half hour to fully come...

What are the correct bulb replacements for my Sega Turbo? I pulled 9 wedge-type bulbs out of my recently-acquired Sega Turbo, and they're all blown. I can't imagine this is a coincidence. The bulbs I pulled out are Stanley 158's which appear to be 3.36W 14V bulbs. Looking at the Turbo...

I just procured a sit-down Sega Turbo, and it only has a couple problems with it. The first is that some of the cars show as a long white line that spans the length of the screen vertically. I haven't looked into that issue much yet, but I'm sure that has something to do with the sprite chip...

Can someone help me learn more about this Draw Poker machine I picked up? I originally posted this on reddit.com/r/cade before I bought it over here: http://www.reddit.com/r/cade/comments/1jj9w7/as_a_computer_nerd_this_find_inside_this_draw/ I then bought it and then made an update over here...

I picked up a Zaxxon cocktail with a Nanao monitor back in January. It worked great when I first got it, but go figure, the monitor started acting up just a few months ago. When the monitor is first powered on now, everything is extremely dim. Within the first 5-10 minutes, some of the colors...

For sale is a working Ataxx board with JAMMA, overhead marquee, and CP. If used in a JAMMA cabinet, the monitor sync will need to be adjusted; this seems to be some kind of fairly common problem with the adapter or the board itself. Looking for $50 or a trade for another JAMMA vertical or...

It's a long shot, but does anyone have one, and is willing to sell it for less than $50?

Is it safe to use a metal hex key for the horizontal coil? I realize that you can't use the metal key while the monitor is on because of the immense heat that will be generated, but can it be used while off? I do have the plastic hex keys, but none of them are the right size for my coil. I...

According to the pinout guide, there is a pin for P1 Spare, and P2 Spare. What are these for? Are they for secondary buttons? In my cab, the left and right fire buttons are wired together, so I'm not really sure what spare could be used for. I am working on a cabinet conversion and I want to...

Accessing Nanao Focus/Screen knobs in Sega Cocktail cab I guess this is more of a cabinet problem than a monitor issue, but I assume someone else has had a similar issue. I have a Sega cocktail cabinet with a Nanao MC-2000-S 19" in it. The access door gives access to pretty much all controls...

I want to convert my Zaxxon cocktail to a JAMMA cab without rewiring the whole cabinet, so I'm going to create an adapter to do so. Does anyone have any 44-pin fingerboards?

I purchased an Ataxx board with the JAMMA adapter off craigslist. The owner said it worked before he pulled it out of his cabinet, but it does not seem to work in mine. Below is a link to a video of the problem. It looks like shearing to me... as if there is a hold problem. However, I have...

My cabinet has two buttons and switches that are sticking and need replacement. Does anyone know a good source for these?

How can I determine what voltage my JAMMA board is running at? Some people seem to be talking about how different voltages can have different effects.

Hey guys, I have the Neo Geo MV1FZ board, and I was interested in doing the stereo mod to it seen here: http://www.neobitz.com/Pages/Mods/MV1FZ-S.aspx This mod, however, was only done for RCA jacks and not stand-alone speakers. My speakers have a negative and positive terminal, but the mod...

I have two MVS carts. Samurai Shodown w/ translucent instruction card Fatal Fury I don't know how much they're worth, so just send me your offers and I'll get back to you!