Search results for query: *

Long time no post! Throttle gear blew up in my #1 Hydro Thunder, so rather than drop $30 on a new one with the same physical design problem, I designed a replacement part and printed it. I've put the files out for free over on Thingiverse: https://www.thingiverse.com/thing:6874028

Hey all. In the market for a Stern Ghostbusters Pro in the Chicagoland-Milwaukee corridor. Let me know what you've got.

Hey all. Ran into a Smash TV board with a shot U99, so I picked up a High Impact to turn into Smash TV. Found some interesting stuff. Both boards sported a few post-manufacture wire bodges, which were actually required to get the games working. First up: Smash TV Wire 1 - U67p16 (-LCAS) to...

Title says it all. My Smash TV's U99 is physically damaged, so I need a new one. Can be off of Smash TV or High Impact Football. PM me with a price.

Going to keep this as short as I can. G07's have serial-connected vertical yoke winding pairs, versus the K7000's parallel connected pairs. I noticed that the G07 yoke came out to 54R, and the K7000 about 13.5. If you work the math backwards, that means each winding should be 27 ohms. Meaning...

This was fun (not). Had a 19K4606 in my Gorf. No shift jumpers at all. Zero hacks from the factory. Very earliest production run on these. Needed to shift the vertical up thanks to it displaying a little low. Found my 19K4616, decided to document the difference between the monitors. Imgur...

Title says it all. Looking for a 6803 Cashbox as used in Special Force and other games of the era. Looks like this: http://pinwiki.com/wiki/index.php?title=Coinbox/Cashbox_Identification_Guide#6803_MPU

Long time no see, gents. Got a Bally Special Force, 6803 hardware, in as a project. Originally didn't boot, missing crystal. Needed the usual touchups on the power supply. It now boots/runs/plays, but on boot, it gives me Left Bumper and Release Left as stuck switches. I've verified it's not...

Hey fellas. Been away from the hobby for a few months, as my house ended up damaged in the Chicagoland flooding over the summer. Arcade ended up with ~16in of water in it. To keep busy, I've been brushing up my 3D Design skills, as I've picked up two 3D printers over the last year and a half...

Got a weird one that I've spent a couple of hours beating my head against. 25K5515 out of a 720, was fully recapped several months ago by yours truly. Worked fine when it left after a 24 hour run test. No issues. Buddy got it home, hooked it up, and told me that the vert had shrunk and could...

Title says it all, would prefer within 75-100mi of Chicagoland. Wife requested the game, I've got to comply. :)

Gottlieb Gold Wings/System 80B - RasPi Soundboard (Custom Sounds!) Okay, so here's the writeup I've been working on for this RPI Sys80B soundboard. Video!: sT2hEAumu2A All of the original work was done by Pinside user "jhanson", with the last post made over a year ago. Here's the original...

I've got a VO:OM that's missing a few things thanks to it's previous owner. Looking For: Control Panel Brace - This silver bracket sits between the control panel base and the control panel top, it is sandwiched in when you close the control panel. It has two pass-through holes, one at each...

Since ringwar is MIA, I needed a bunch of these for myself. Decided to make a boatload, because I know others need these things, too. On the left, mine. Middle, a spare from ringwar, and on the right is a scavenged one from the 80's. Price is $8/10pcs, $4 S&H on any size order. Sizes may...

WTB: Bally Astrocade Custom IC 0066-117xxx (Gorf, WoW, Robby Roto, etc) Title says it all. I've got a dead one in my Gorf. The Bally 0066-117xx Custom is used in Gorf, Wizard of War, Space Zap, Extra Bases, Sea Wolf II, 10-Pin Deluxe, Professor Pac, and Robby Roto. Ed Lutz also posted that...

My Demolition Man is missing the coin mech retainers. I need them! Anybody have a beater door/pile of parts/etc they want to part with so I can fix this thing? Really not keen on spending $160 on a new one, when this one is structurally sound. Shoot me a PM if you do.

My Missile Command decided to take a dump last night. :( There's what I'm getting in test mode with the Braze Kit uninstalled. With the kit in (or out) it passes all tests. Previously it was having an issue with the trackball (only moved right, bad MC14584), but while repairing it, the board...

Title says it all. Should be able to get them out of Pooyan, Gyruss, Roc'n Rope, Tutankham, Yie Ar Kung-Fu, Hyper Sports, and Time Pilot. Shoot me a PM if you've got a spare kicking about.

Got this one from a local. Works fine, but has no sound. Going by the 5th generation Clean Sweep manual I was able to find, I've definitely got a 5th gen main board (Smart 3841). This sound board however has no documentation anywhere. One half the bridge rectifier was blown up (2x 1N5404)...

Looking for this, basically. Goes in Centuri cabs. My Gyruss is missing it's box, sadly.