Search results for query: *

I ended up with an Omega Race this weekend. The board is really clean, no acid damage. The monitor is a tiny bit blurry (focus adjustment?) but otherwise works well. As I understand, I could replace the board mounted battery with a 3.6V rechargeable phone batter. I'm assuming any old 3.6V...

I have a Battlezone PCB that has a frozen reset button. It's feels like it has some sort of corrosion on it that seems to be preventing movement of the button. My thought is to remove it, soak in acetone, check to see if it still works. Anybody know if these buttons are normally open or normally...

This is another Battlezone repair thread. After replacing big blue, rebuilding the ARII-02, recapping the monitor and reflowing all of its connectors, replacing the self test switch, reflowing the PCB inter-connecter and reseating all of the ICs on the PCB I have the following visual...

I have this 15V2000 that I pulled out of a non-working Battlezone cabaret and am now testing in my fully working Asteroids Cocktail. At first test the monitor had no glow. I reflowed a header and replaced some caps while the boards were out. Now the monitor buzzes quite loudly, more than the...

I have a 15V2000 that I attempted to recap this evening. The caps that were provided in my kit from Bob Roberts do not match the existing caps on the deflection board at most locations, they do match the existing caps on the high voltage board. Any thoughts on why, or how I should proceed? I'm...

Looking for a topglass, willing to have it shipped. Any help would be great, thanks.

Hello, looking to buy a Centipede cabinet, cabinet only, maybe some artwork and a monitor too, but I have PCB, CP, Wiring harness and everything already. Any leads are appreciated. Thanks.

Drop me a line if you find anything appealing. -Battlezone, empty cabinet, very light water damage, side art is mostly intact. I'm hoping for about $25. -Tutankham, complete, light water damage, but the swords are still there! Maybe in the league of $75. -Middle Earth Pinball, widebody...

My Space Invaders is blowing the 1 amp 115 volt slowblow, I've never had a game blow fuses, so I'm not sure what to fix. I'm sure this is a really stupid question.

This has been an issue plagueing my Asteroids since I got it... When you hit the two player button (on freeplay), it plays one game, then after that you can't play one OR two player, even if I credit the machine. If I sit and play one player, nothing but, it works great.

I'm thining out the heard, my garage looks rediculous, and I park a car in there! :O I'm pretty flexible, drop me a line if you find anything appealing. -Three empty cabs in various conditions and states of restoration, Battlezone, Defender, Centipede. -Guts! I've got a pile of Atari A/R...

I'm looking for a Centipede cab, as I have a completee set of guts, I'll be travelling up to Seattle soon if there's one up there. Thanks. If anybody in the Seattle has games they'd like cleared out, let me know.

I got a free air compressor last fall, said the valve was broke or something or rather. It seems to work fine to me though, but I've never used one before. When I turn it on it fires right up, and air comes out of this little hole, when I put my thumb over it it builds pressure. This sound like...

I have a 25 inch WG, unknown, any interest and I'll snap some shots and figure out what model. I was told this came from a Golden Tee. I have an empty BattleZone, light waterdamage. I also have Defender, front art, but no sides. Any interest and I'll get some snap shots. All items, make an offer.

Well, it's been a while since I've touched a restoration project, so I thought I'd make a post before I get on to my Pac project to make sure I don't mess it up. I'm thinking this needs to be resprayed. I'll go in with the bondo and spruce it up. If I remember my concern about respraying...

I have a Battlezone and Defender cabinets for sale. Both are Empty. Battlezone-Some minor water damage, Side art is OK, kind of peeling in one corner. I also have some parts you can buy, I have an open face kit, the parascope deal and a wiring harness. Make an offer. Defender-Solid, no water...

This is the most outrageos I\'ve seen... This is the most outrageos I've seen, 26,000??? http://portland.craigslist.org/clt/154206523.html

But I just had a few more things to get straight. In an earlier topic it was suggested that I have the edges anealed, rounded and pencil polished, and I'm not sure what this all means, and I'd like to know before I have it cut. Also not sure if the glass should extend to the edge of the wood, or...

I'm looking for a Pac-Man power suply. I could also use a few of those bars that hold the monitor on and the back retainer for the monitor glass. Thanks

I took the flippers off my pinwhile shopping. Now that there back in, a few slide a bit every time they are used. I toghned them in as tight as I can. They worked fine before I shopped it. What to try next?