Search results for query: *

I had problems with this game and thought it was an issue with the monitor. I purchased a K7400 which I saw work on the bench, but I still can't get a good picture. Can I assume at this point that it's the game board itself? I tried all the recommended fixes that I could find.... Thanks in advance.

Just did a tube swap (broken neck pins) on a 25" K7000. I couldn't get the monitor going so I decided to try the Chinese version chassis. My donor tube has 1.8 oms horizontal resistance and the vertical is at 9.4 ohms. According to my research, these fall within the required values. My ISO...

Just tried a tube swap. Zenith replacing a Zenith 25" on a K7000. I had problems prior to the swap, so I found a working TV tube. Now, after a new HOT, voltage regulator, flyback and checking all components/pads I have been advised to check, I still have no power to the neck. Here's the...

25" K7000 with new voltage regulator, hot and caps. Power at the red wire of B+ on the resistor is 165. It is 132 on the blue wire. I can't get this thing to fire up. I've checked all that I can find to check....Admittedly, I am not great at this stuff and that is why I come here! Someone...

I installed the new System 11 Rottendog board and the PIA lamp on the board continually flashes. I have no flippers, playfield bumpers or introduction of a new ball. When hitting the Start button, the machine says "BALL WAITING"... I just want to get this thing working so I can get it out of...

Working with a 25" Zenith tube swap. The old tube has these measurements: 3.2 and 8.6. The replacement tube is: 1.6 and 10.2. I'm assuming that I don't dare just "plug and play" and it's time for the dreaded yoke swap? (My first...)

I have a 25" Wells Gardner K7174 that won't focus. I'm thinking flyback. Here's the problem: The plastic around the pins on the tube neck is brittle and breaking off. Should I just replace the monitor instead of trying to fix the focus issue with a flyback? I don't want to spend money on...

I have way too much bass on this juke. The treble speakers are in the top of the box and the 12" bass speakers are in the door. Will installing some capacitors directly to the positive lead of the bass speakers cut down on the "muddiness" of the sound without damaging the system? Thanks.

I have followed all the required steps to turn off the attract feature on several models of CD 100's but with no success. The screen says "Attract Mode Off" but it continues to function. Is there a step of which I am not aware? Thanks.

I don't have an eprom burner nor would I know how to use one if I did.... Where can I get a programmed eprom for a CD 100 C? Thanks.

I have a Rock Ola 440 that was working sporadically and then stopped writing in the selection. I cleaned all the contacts from the keypad on down. Nothing. If I manually flip a lever, the read out selects, plays and then returns the record. For a while, it would recognize the keypad selection...

I just picked up a Rowe MMCD1 juke. I'm working out the bugs but having a problem with the button panel. At first, several numbers did not register but with some electronics cleaning spray and reflowing all the connections, I have gotten it down to only the "1" button not working. The CCC has...

Just for giggles, I am "Frankensteining" a bunch of old early CD-100 parts together to see if I can make something to put an MP3 player in. I was successful in getting some sound out of the amp (only by unplugging the mute) but I am having problems with the power supply. I have the appropriate...

I have a Bally 1091 Quarter machine that I am nursing back to health. The most recent problem is that if the handle is pulled too strongly, the center wheel stops immediately. I can't find anything broken or unhooked in the mech. Any ideas? And, as always, I appreciate the help.

I need the read out assembly for a 1484 wall mount juke. The plastic post that holds the wobbler broke off. Anybody know where I might find one? Thanks.

I have a good CD 100 display, CCC and control panel - all tested in a working machine. When I hook up the panel and display to a machine I am restoring, I can't get numbers 3 or 7 to register. I checked for continuity on the respective wires and it is good. I am at a loss here. Anyone have...

I have to fix a USC2 that is over an hour away. I have an SHP1 amp. I'm thinking about recapping that and taking it to the box. Is this just a "plug and play" or am I better off driving up there to get the TSA10 and bringing it home to recap? Thanks.

I finally had a chance to turn on the OutRun after a long winter's nap and the sound is completely missing. If my search is correct, it looks like the first place I should look is for 12v going to the sound board. I thought I had this thing sold to pick up a drum set for my son but now it...

Anybody know what resistor I need in the R8 spot on the power supply board? The one there is toast and I can't see the color codes. Thanks.

This is not a video game but I can't see where else to post this.... I got this Super Chexx for my son for Christmas but it won't "finish" a game. If you coin it up once, it does the three periods but then continues to allow unlimited play. Who knows something about these boards? I really...