Search results for query: *

Looking for an Incredible Technologies I/O as used on GT, Bags, silver strike. Please let me know if you have something and the price.

Thank you

Is there a diagram for the complete pinout of the I/O board to wire up a GT 2021? I am putting back together a cannibalized cab, needing to build some harnesses and converting it to a pedestal. Looking for the wiring diagram for the I/O board that uses all molex connectors and not the jamma...

Thank you the 9500GT meets the requirements also for the kit, so i'll just grab that one. Do I need a 9500 with a certain amount of ram 512, 1G? Thanks

Thank you for the explanation, That would make sense if the software was too old to have the drivers for a newer system. Does my logic seem correct though that I can just swap upgrade the MB and GFX card to get the new kit working when it comes out this summer?

I just purchased a silverstrike/vegas bowling. I am wanting to update it to the arcade collection that will be released as a KIT, but the MB and GFX cards do not meet the matrix being the oldest (865). Can I simply move up to a intel DG965WH with a GT640 graphics card PC and be all set...

In case anyone else ever comes looking with the same issue, upgraded and swapped the memory and the issue is resolved.

I have an odd issue,, every game I have played on a new to me megatouch force running 2007.5 has worked except the mini golf. If I select minigolf the unit locks up after the game course is selected and loading, garbled video and sound and if I try to reboot the unit just beeps. The only...

http://www.ebay.com/itm/Arcade-dig-dug-cocktail-machine-very-good-condition-/331011789787?pt=LH_DefaultDomain_0&hash=item4d11d713db

Cross hatch and full screen color test were done for convergence and purity. My sig generator produced these fine, however with cga game signal i seem to have smearing and tearing of the contrasted levels white n black. Guessing a cap or something.

Hope there more common in your area been looking for 2 years in Michigan

I have a D9200 the one I have been working on that on the test generator looks fine, but when connected to a game CGA the bright whites and blacks streak and tear across on the screen. If I connect it to a cga or vga computer I don;t have the problem. Since all the electronics is the same once...

Just a quick update she works!

Pics here http://www.home.comcast.net/~polishedball/TWIZ ideally looking for a better wpc A title and a beat up B or C title in trade, who knows I have been expanding my collections lately with redemption vids etc. So open to hearing any offers that are 4~4.5K in value. Also have unpictured...

I have some from some other Kine swaps, but this new yoke has plastic screws on the corners to set it back fully adjustable to about an inch. Thought that was pretty cool. Think I scored the last NOS yoke in the country. At WG it has been discontinued for some time.

Also will that black burn spot on the back of the kine cause me any issues? it was under the winding...

yes shorted. Pressed my luck and have it down to this now, must I use that white tape or can i set it up on the tube direct? I have only done sony's in the past and they use more of a white athletic tape that never peels off.

OK got it off, now the question is can I setup the new one on top of the remaining old epoxy? or do i need to press my luck removing that. And do I need to replace the tape that i peeled or can the new yoke go right on the neck glass.

These 9200's suck when they break... one is my nemesis right now also.

found the video of the car charger method but the tube doesn't appear bonded at the back of the crt it seems to be more down the neck.