Search results for query: *

I had the opportunity to pick up one of these little carousels dirt cheap several years ago, but the fella was a bit flaky on coordinating meeting up. He's a bit of a drive from me, so I've only been out there and peeked at it one time, I didn't dig around it to get a good look. Needless to say...

Bought this along with several other Williams boards a few years back namely because I needed a Defender pcb and this particular one was just interesting....but I have no idea what this "mod" is suppose to be or do. Board number is 5770-09616-XO A majority of the blue wiring originates from...

SiLeNtNiNjA1 has been a huge help to me with this issue so far, but I hate to keep bugging just one person and it may turn out to be sometime of an odd problem. Backstory - Picked up a Silent Scope 1 for cheap, everything boots and checks ok then gets the typical Error 11-P, bought and socketed...

Anyone have the pinout for a CR-34 tube ? (single color rear projection tv type tube) I've looked around and have yet to come across one. The neckboard has a couple markings on it, so maybe that'll be enough to get started.

Anyone know off hand the difference between an LA7833 and an LA7833S ? I have the datasheet for a standard LA7833.... but can't find anything specific to the "S". I read somewhere you can put an S in place of the standard, but not the other way around. I kinda wanted to figure out "why" if...

What's the value of this surface mount aluminum electrolytic capacitor ?

Does anyone have an R-83 that can grab a few pictures of the internals for me ? I don't care which version it is since I just need pics or the original guts. Kinda like the inside shots here - http://www.pinballrebel.com/archive/ami/r83/r83.htm Just need a few better angles and whatnot. (and...

Anyone here ever dabble in burning an audio file such as a .wav to an EPROM for use in a playback device of sorts ? I was kinda looking over this site - http://sm0vpo.com/eprom/wave_00.htm - but hadn't really sat down to fart with any of it yet. I have an older Akman DS129 unit and had thought...

Ok, now that ya thought this was going to be an easy one....... What I need are a set of legs for a Gottlieb/Premiere Bullseye. http://www.ipdb.org/machine.cgi?id=4563 Really short little legs. I took a quick glance over at PBR, but didn't see any for these little machines. Just picked one up...

With only one real source there wasn't much choice to buying one, so I did. I had read some people mentioning the color differences, but all the pics I saw didn't look tooooo terrible. That is until I received mine. Thought I could live with it, but now it's starting to eat at me a bit. Granted...

Does anyone have the Williams Hyperball "Parts Supplement" manual #16P-509-110 they'd be willing to scan? (Not the Instruction Manual and Drawing Set #16P-509-101, that one is available at lots of places)

I know there's a console section, but figured I may get more of a techy response here. I dug out an old "Pong" TV console jobby I've had for years. I remember the picture being kinda squigly and whatnot last time I used it, now I get no true image whatsoever. The "ants" image does change, just...

Can anybody with a Galaxian style cocktail grab a pic of their coin door where the coin counter mounts ? This is the style that has the single slot coin door. Mine was kinda jury rigged mounted and interlock switch wasn't even being used, I want to mount it properly to at least be able to use...

Anyone ever seen or know anything about these ? No manufacturers marking whatsoever, not on the cabinet, not on the pcb, no tags, no stamps, nada, zilch. Internet search so far has brought zero info. I've had it awhile now and hope to get around to this project sometime or another. It did seem...

I'm looking for red ball top 4/8 way joysticks, preferably leafs, that are NOT very deep in the base. (limited space under control panel) They're for a cocktail cabinet project I'm starting on. I need to do some measuring before I actually know what might fit, just looking for ballpark direction...

Been doing a ton of reading on this, just need a little clarification.... It originally had TMS2716 ROMs. I've since burned a new set of regular 2716's. Power supply checks out good. I do have two suspected bad RAMs, waiting on parts order. I don't have another 8080 CPU handy to test that out...

Didn't know where to throw this - not really "videogame", not really "pinball"... I need to rewind a ball lift motor on a Williams Hyperball. (120V) Looking for a spool of wire to do it. Appears to be about 26 AWG. (25-27, need to remeasure) I call it Bell wire, some call it Magnet wire...

Has anyone here ever built an adapter of sorts to read AND burn the TMS2716's in their programmer ? Say for a programmer that can normally do regular 2716's but not the TMS2716's. I just started poking around looking at it and figured I'd ask.

Can anyone confirm that the red Deluxe machines are suppose to say "Part II" on the title screen ? Trying to help a friend out with the ROMs on a machine he just picked up. I know there was a Taito Part II and such, just confused why the Midway version says it as well, or maybe it's the same...

Need two if possible as mine are both missing. FYI - These are not found in the "kit" machines. Motors like seen here in this picture.