Search results for query: *

I managed to pick up a game with a Neotec NT-s501 monitor with no chassis. Seems like this is a tough chassis to find, and a 25" monitor is tough to replace. Any suggestions on either route?

Picked up something today. Not sure if it's worth anything...it's a Vulgus in a Centauri cocktail cabinet. Not sure if it works, I just grabbed it and put it in the shop for the day.

Looking for a working or at least mostly complete track and field in or near north jersey/NYC. If you have one please let me know. Important for me is at least a clean cabinet and complete wiring.

I have a customer with a Midway Tapper that was not working. Monitor powers on, nothing beyond that. I put in a new power supply and can verify that the boardset is receiving the proper voltage per the schematic. I also put in new ribbon cables. But unfortunately the only result I get it...

OK, my issue... I picked up a Konami Simpsons 4 player standup board with a bad chip. I knew it was bad, and I'm a pretty darn good solderer. I think I got everything done correctly, but I want to test each trace, and I think it's a multi-layer PCB, and I can't find the chip in the schematic...

I have a bad board and I just want to swap it. Does anyone have a working one?

No expense spared. Here is a list of what's been done, but I'm sure I may be missing a few things: Original playfield, restored and clearcoated by Neo Original boards matching serial number boards (except I think the fliptronics) gone over by John Wart and bulletproofed (NVRAM, etc) Brand new...

Glass-smooth clearcoat. Really nicely restored playfield. I purchased it already done, but I've acquired an Addams Gold, so this one won't be needed. Original TAF playfield, not an IPB. Able to ship if needed, or can do local pickup or bring to York if prepaid. Asking $1200 OBO

Really cool find. an NOS Black Hole populated playfield. Still sitting in the original box. Still with the factory rubbers! Contains the factory manual, etc. Also have a NOS unpopulated lower PF. Asking $1900.

Very rare bird... This is an NOS Xenon playfield. never used. Not drilled/dimpled. This is an awesome piece of artwork, and you can use it for that or you can pop in into a game. You can go all out and send it to a professional restoration house and get it perfected and clearcoated if you...

We have had this for a few years, but haven't used it lately, so time to move it on... It's a pot o silver. Two wheels in the back, and you can skill stop them. Machine runs on quarters, not tokens. We have the keys. Lights up and plays correctly. Heavy machine so would prefer local pickup...

I have a Xenon recently picked up. It's going to be brought to NYC for an event this Sunday and, truth be told, I don't want to bring it home. So I'd just as soon sell it right from the event (or could deliver it). Game boots and plays. Playfield has mylar, so it's pretty decent. There is a...

I picked this up recently and put a fair amount of time into it, but I'm leaving it for someone to do the "pretty" work on it. I have gone through and done the following: I installed a brand new power supply in the computer I also installed a brand new CPU fan, cleaned up the heat sink, put on...

Hunting for one of these... Price offered is directly related to condition. Open to anything from a nice minty one to a toasted one. Located in North Jersey.

This particular machine is well above average condition. It boots and plays 100%. It features a very nice cabinet. There is little to no wear by the tube kickout. Most of the pop bumpers still have the factory mylar rings around them. The mylar has peeled up, but it's still in place and has...

First run machine 3D backglass Shaker NEW (but not installed) Eli's lit ramp kit Full Cointaker LEDs (flashers too) Lit recognizer Arcade cabinet mod cliffy on scoop superbands Hallmark cycles (not installed) Playfield slider rails Clear protectors around flipper buttons Black pincab...

Just putting this out there...I have an RFM I just picked up. Decent machine, but needs a few things. It was in a home for the better part of the last decade and never once touched, so it's badly in need of a shop job, flipper rebuild, etc. Cabinet is nice. Coin door and lockdown bar are...

It's a reimport with a really nice coin door. Decent cab. Playfield starting to wear around some insert edges. Almost totally LEDs. Clean boards. No credit dot. Just installed latest ROM. Topper intact. $3900 takes it. Little wiggle room, but not much. Ill happily keep it and put the work into...

I picked this up a while ago with the intention of restoring it and playing it. Fast forward and my gameroom is full of pins and no time or space to keep this. Machine is NOT working. I have the boards out of the game. Not perfect by any means. And here's the kicker...it's in my basement...

Looking to part with my Paragon. I need a bit of room. Gorgeous cabinet. These are reds you won't see anywhere on an unrestored machine! Playfield has normal paragon wear. Backglass is decent. Starting to curl on the bottom, but you can triple-thick it to seal it in. Game needs to be...