Search results for query: *

Hi All, I have a Firepower that isn't booting up at the moment. When powering on, both LED's on the MPU stay lit without flashing. From the write up on pinball.flippers.info, I removed the solenoid fuse and disconnected the Driver board and still got locked on LED's without a flash. From what I...

I just purchased a game with a U5000 monitor in it. It was displaying all red when I bought it. I have heard that the transistors on the neck board overheat and are a common problem. When I took a look, sure enough the pads on the middle one were completly black and the pads lifted. It already...

Can I replace a U5000 chassis with a K7000 chassis? I have a U5000 monitor that is a bit messed up. The tube is fine so I was wondering if I could put a K7000 chassis on there? Is it a direct swap, ie. no changing yokes etc? If not, you'll see me starting a U5000 need troubleshooting help...

I have the following for sale, prices include shipping to lower 48. *SOLD* - Ms Pacman PCB with Daughter card and ribbon cable - working $80 - *SOLD* *SOLD* - Ms Pacman PCB with Daughter card and ribbon cable - works, except occasional reset $50 (I have a cap kit that I will include) - *SOLD*...

I've searched and can't find a definitive answer, just lots of conflicting posts. How does the security work on Golden Tee Fore? There's 3 pieces, PCB, chip, hard drive. Which parts can be swapped around?

I have two cabs that are free, need gone asap. Both are in great shape, Assault needs new artwork, but both are solid. Bring them back to original or make into something else. Atari Assault - TAKEN:) -needs monitor, pcb, power supply, 1 joystick -EDIT : the control panel and marquee have been...

Does anyone know where I can find an Atari Assault joystick?

I'm looking at picking up a Sega Out Run. It is stated as complete and working, but dirty. It's hard to see from the pictures, but it looks to be in great condition. I am thinking $200ish give or take is appropriate?

After reading what a bunch of other members have been doing I decided to pick up some citristrip to clean up the glue from an old CPO. My question is, whats the best way to clean up the citristrip residue so that the surface is ready to sand and paint?

Hey guys, I was looking into modding my Tron to add free play. I found a nice looking mod at arcadecollecting.com. Is this the one everyone else uses? I don't have any blank eeproms, or a programmer. Does anyone sell the chips already programmed? If so please PM me:)

I just picked up a Golden Tee Fore! Complete and from what I've read you need to have the hard drive and pcb as a pair for it to work. Since IT no longer supports this model is it safe to say that if the hard drive craps out I am SOL? If so, how do I create a backup of the hard drive, and also...

Hey guys, I don't know much about pinballs so please bear with me:) I have a Firepower thats works except for one thing. When I get a ball into the multi ball spot in the upper right of the playfield it doesn't eject when it should. If the multi ball isn't lit it should pop it back out, but it...

I have a Ms Pacman with a 60-1 installed that I would like to trade for a Star Wars Trilogy. The Ms Pacman is solid and complete with a new CPO. Sideart has scrapes and scuffs that are to be expected. I used a jamma-to-pacman adapter so that it can quickly and easily be converted back to an...

I am installing a brand new 60-1 small board that Nixs sells and am having an issue. When in the I/O test screen all my buttons register properly. But when trying to use the test or service buttons to go through the settings they do not work. Each one is a simple momentary switch, and each...

I have no wood working skills what so ever, but I need to cut the slits in some pieces for some T-molding. I am going to pick up a router, but have no idea what the different types are. Can anyone point me in the right direction as to what to look for? I see fixed base, plunge, table...I'm lost LOL.

Can anyone tell me the difference between the boards? Which would I rather own?

I'm begining my first restore and need to buy some artwork, but am not sure where to buy it. I'm looking for Ms Pacman/Galaga reunion cocktail cpo's, underlay and glass top. Any ideas?

I have a couple Bally Midway style cocktail cabinets that I'd like to restore. They both have slight damage to the bottom edges in areas. It is that brown woodgrain type look, I'm sure you know it all very well from Ms Pacman cocktails etc. How do I go about repairing it back to original?

I have a Ms Pacman PCB that works perfectly. $90 shipped.

I'm looking for a Popeye in good working order. I'm in Michigan 48304 Thank, Tim