Search results for query: *

Any idea on prices for these please? Vs Roms sets - https://flic.kr/s/aHBqjAMKP3

Trying to get some rough prices on the following items please? System board with Wrecking Crew (2x 0002 PPU) System board with Balloon Fight (2x 0003 PPU) System board with original Castlevania daughterboard/Vs Pinball (0002 PPU and empty PPU at present) Original Vs Dr.Mario duaghterboard (0003...

Anyone any idea what size the bolts are for mounting the monitor frame to a Taito SI and then what's used to mounting the monitor to the frame please?

Does anyone have any of these spare please? http://www.itw-fastex.com/catalog/index.php/dw/op/a/3/c/5/p/55?m=no Don't seem to be able to find them in the UK. I'm missing the ground clip on the control panel on my Paperboy Cheers!

Does anyone have any insight into LabProg+ / BK Precision 864 error codes plesase? My error is: EEPROM test ................... OK 0:00:00.1 L0049: Supplies and DAC test ......... ERROR: #0013H. L0050: L0051: L0052: Programmer s/n: 50-02895, BV: 80H, rPCB: 07H, mPCB: 00H L0053: Identification...

As per the discussion here I have the same ram configuration, and it has also been scratched off so I cannot see it. This original poster has said that the two rams @12U and 12V are 1223p-35 1k x 4 static ram so the same as 2114's?? I don't know what the chip is @ 11U. Any ideas...

Doing another run of the following daughterboards if anyone would like one. They will be £65 plus postage Daughterboards are: Vs Dr. Mario Vs Castlevania or Top Gun Vs Goonies or Gradius Generally turnaround time is within 4 weeks from order

I bought a taito space invaders cabinet that was missing the original B&W monitor, and have tracked down a replacement with a frame. Does anyone know what the process is to re-install the monitor back in the cabinet please? There is nothing in the manual about installing or even removing the...

Any interest in a Vs Sky Kid reproduction?

I'm working on a Playchoice10 PCB for a forum member and have found a fault in the DC-DC conversion section. The parts in this area on a PCH1-04-CPU board are a: RK13 Schottky Barrier Rectifier https://www.digchip.com/datasheets/parts/datasheet/139/RK13-pdf.php and a IR3M03A DC-DC...

I'm a bit confused about Vs Sky Kid. What is the reason for the board to be so big? As far as I can tell only one side of the board is populated, and the other side is empty? What not just create a smaller pcb that goes on one side? Is there another reason why the board is so long?

Looking at Johns arcade, it says that it says that the Vs.Freedom force is convertable to Vs Super Sky Kid. Ok cool. But it also says that Vs RBI baseball is compatible with Vs Super Sky Kid and Vs TKO boxing is compaible with Vs Super Sky Kid But I guess it isn't the other way round i.e...

Anyone got an sources of non-fake RP2A03 CPU's please for Nintendo Vs machines?

I was wondering if anyone could suggest what to look at next with a Millipede pcb please? So far I have confirmed: 1) All roms ident 2) Voltages to the PCB are good The PCB is watchdogging. On bootup I see the following screen: If I disable the watchdog I see this: I had a look...

Does anyone have a Juno First bootleg they could look at please? I'm missing some bits on my boards and finding it hard to determine what they are: Top board - I'm possibly missing a transistor but I'm not sure. It had a bodged TIP110 in the location circled. Another picture I found had...

Can anyone confirm which way the roll pins on the handlebars come out? I am assuming that i tap them out from bottom up, and they come out at the top? I reinsert them top down So I use a punch pin this way in the direction of the arrow with a rubber mallet? Mine are badly rusted so it's...

If anyone has one spare I'm looking for a Systen 2 (Paperboy/Champ Sprint) Coin Bucket

I'm looking for the h-channel (plastic t-moulding type item) that goes below the marquee on a system 2 cab (Paperboy/Champ Sprint) etc Let me know if you have one please. A repro will be fine AFAIK They are not the same as the system 1 h-channels Cheers!

After over 11 years of collecting I have finally bitten the bullet and have decided to go with a scratch build of a Paperboy cabinet!! The cabinet means a lot to me, and was one of the games I played ALOT back in the day. It is one of my favourite games without a doubt. When I first...

Does anyone know the current price for a Konami Surprise Attack (JAP) PCB please?