Search results for query: *

I bought this speaker. Will mount it facing out of the cabinet. Speaker grills in front too small. I'll shield and ground backside of speaker. It should resolve my issue.

I have not tried this, but it's very good advice! I'll try it out and let you know how it goes. Thanks a lot!

I'm building a TKG3 Bartop. I get a ripple in the LCD due to the speaker. I tried a smaller speaker but it still occurs. If I move the speaker away from bartop, problem goes away. I need to be able to mount the speaker inside the cabinet. Any solutions to this issue? I'll attach a few pics.

I just purchased the exact same Orca CK PCB. Did this CK to Jamma adapter work for you?

Is the power switch with power cord also for sale?

I've got a post on the Wanted forum, but wanted to ask the sellers here, anyone have non-working TKG3 Boardsets? Also looking for a TKG3 sound board. PM me if you got one for sale. Mylar

I'm looking to buy non- working TKG2 / TKG3 Boardsets. PM me what you have and how much you want.

I'll take the TKG3. PM sent.

Final Power Supply Setup! I've attached a pic of what the final power supply looks like. It works!

Thanks! Thanks for the advice. I'm actually going to be using a Vector Labs DK 4 game switcher with this power supply. I will be purchasing their wire harness which has a terminal to each wire, so I should be able to hook it up correctly.

New Switching Power Supply I took your advice and switched out the power supply. The 130W Switching Power Supply fits in the same spot as the original. This will be placed in my 3 game multi-kong. See attached pic.

Thanks for the advice! I was looking at the Happ's today on Arcade Shop's website. I'm curious to know how you mount the Happ onto the wood frame where the original Nintendo power supply was. If you could post a pic, that would be helpful. Mylar

Thank You! Now I know for future issues. Mylar

Yes I did! I got the sound back working. When I switched monitors, the sound cable got installed a pin off. I reconnected the sound cable to the proper pins and now it is working. Mylar

Issue Resolved - Sort of After a bunch of swapping between cabinets, the monitor is back up and running. Turns out it was a faulty PP-7B power supply. My only issue now is I still have no sound....

Update I installed a different Sanyo 20EZ monitor into my cab and it had the same issue. At first I was freaking out because I thought my DK and DKJ boards were fried, then I swapped the boards into another cabinet, and they worked. Starting to think that this is a power supply issue and not...

I have a new to me Sanyo 20EZ. Performed a re-cap, replaced B+, IC 601, HOT, etc. When I first turned it on it looked like the first pic. After playing a while, screen turned all white and lost audio. I beleive this to be a monitor issue because it does it with any board I try. Any idea what the...

I recently purchased an original Donkey Kong Arcade, a TKG2. It's one of the Radar Scope conversions. The power supply was not working when I bought it, so I temporarily installed a PP-7B. This gave me an opportunity to tear-down the PP-7A and see if I could find the issue. After tear-down...

No C379 :-( I've successfully completed this modification on two Sanyo 20EZ monitors. Planned on doing this to a third, then noticed this Sanyo Sound Board doesn't have a C379 spot on the board. See attached pic. This is from an arcade that was originally a Radar Scope converted to Donkey Kong...

How does the Galep-5 compare to the Xeltek SuperPro 610P? Specs state Galep-5 compatible with 62k devices while the SuperPro is compatible with over 100k devices. Any input would be appreciated.