Search results for query: *

Looking for one of these. Billtronix is out of stock. Anyone have one they wanna part with?

I find myself in need of another batch GO7 flybacks. Competitive has great pricing on qty buys, how is the quality of these? Anyone have direct experience? http://www.competitiveproducts.com/list.php?id=43

Is there any documentation out there for the i/o board that is used for 4 player cabs? Got one here that I installed into a cab that was built for the 2019, but built wrong. There was no switch wires connected to the #5 and 6 switches for plyr 1 and 2. Connecting the #5 wire according to the...

Ok, the 2019 in 1 project I got thrown in the middle of has ground to a halt. The board will load the "baby star" splash screen and after a few seconds will go blue screen. I'm assuming the hard drive is corrupted. Is there an image somewhere online to make a new drive? Or some place to obtain a...

I know little to nothing about the 2019 in 1 setups but got dragged into installing one that was wired up by someone else. No documentation...although I found a manual online which doesn't have alot of info. First off...when in the setup menu to change video modes I get a "runtime error 53" and...

Sega Lindbergh arcade cabinet. HD LCD monitor. Cab only, no boardset. Good used condition, several available. Straight from Japan...has Japanese instructions and Yen coin mech. Local pickup welcome or you arrange freight from 48116. Several available. Some have headers installed from the last...

I need to replace a Toobin marquee. The "repop shops" all want a measurement so it can be cut to fit. Can someone with a Toobin measure it so I get the correct dimensions before I order? What happened to the original you ask? Apparently the previous owner had the screws out and never put them...

Have a Roadblasters to get runnin' at work and its missing the monitor. I figured since this is outside of our "classic" range it would be a good candidate for an LCD panel instead of wasting time chasin' down a 19" med res monitor for it. So I ask....what 4:3 LCD panel would play nice with...

Looking for 9010a pods....mainly Z80, 6502, 6809, and 8080. Will consider non working if the price is right.

I need info on this game. One came in yesterday with no manual, cut coin switch wiring, and problems. A bit hard to diagnose the thing if I can't coin it up. Betson doesn't have a manual online and no luck getting thru to them on the phone. Anyone have one of these? I at least need the coin door...

OK engineer types... I need to come up with a "coin divider" circuit to enable 2 coin/play on videos that don't allow this via dip switch settings. It will also be used to get 4 coin/play on certain pins that don't have that setting. I need to keep it as simple as possible since I'll be...

I've been thrust into a project involving repair of several of these Megatouch games. All of them seem to have HDD issues resulting in random game freeze, not loading the OS, etc. Is it possible to install the software as downloaded from Merit onto a replacement drive off site and have it work...

OK, I don't know where this came from. Looks like some sort of Taito booter but its odd that it has a larger than normal edge connector on the top board (G connector). Itsa 56 pin instead of the normal 44 pin. http://www.flickr.com/photos/62937081@N00/8453782297/sizes/k/ Any idea what this...

Several boards FS. Wizard of Wor (working, all sounds and voice OK) $225 Gorf (as above) $150 Tron (complete, not working, I have at least 2 of these) $50 Mouse Trap (tagged working) $75 Venture (tagged working) $75 Satans Hollow (complete, not working) $50 Kick (works, sound issues) $75.00...

Found this by accident looking for something tonite....quite fascinating. http://mediaburn.org/video/wired-in-raw-28/ 1982 AMOA show: http://mediaburn.org/video/wired-in-raw-24/ http://mediaburn.org/video/wired-in-raw-25/ ^^That's Jay Fenton checking in on his latest game Robby Roto^^...

Can someone run checksums on these roms for me? I need 4 character checksums, not CRC. Troubleshooting one of these boards and from its behavior it looks like its running out of code and resetting in the attract screen. My USB floppy is loaned out right now, so I can't get files to my ancient...

Anyone have the file for doing the single rom mod on a SID boardset? I'm working on a board for a forum member and can't for the life of me get it to read 2716s correctly. I've wasted too much time on this and so I'm ready to take the easy way out. I understand the basic principal behind it...

http://www.biddergy.com/catalog.asp?catid=8342 Seems to be located in Kalamazoo, Mi. Nothing too special that I saw, but maybe some projects for those inclined to take one on. The "Classics 1" is a Galaga that could be easily restored. Just passing this along. Someone on my Facebook brought it...