Search results for query: *

Trying to bring a World Rally back to life and need the steering wheel assembly (don't need the pedal but if you have it also that would work). Shipped to USA 98272

Have a 27" 27K7500, had a bad flyback and bad resistor R111. Replaced both and did a full cap kit. Adjusted B+ down to 118V from 125v at the B+ test point. But now when I turn it on I get nothing but a solid white raster, image seems to fill the screen correctly. White raster shows up even...

Just picked up one of these and one of the guns has been broken in half. Need shipped to USA 98272.

Have a bad custom on a m72 rtype main board. Looking for replacement boards. Shipping to USA 98272.

Have an rtype with what appears to be a bad custom on the main board. Looking for a working main board or possibly an entire stack. US shipping (98272)

I placed an order over the website for some power supplies back on April 5th, got the email confirmation of it going though but haven't gotten tracking or the items. Tried contacting them over the website contact form, email and today tried the phone number with no answer (and the mailbox is...

Anyone have a line on a schematic for a sanwa PM1723 monitor? Or have one that they can measure the value of R401, have a chassis here with that resistor with a hole blown in the side. I don't know what letter suffix it is as the corner of the PCB with that part on it is missing.

Need one of the coin accepter plates and assemblies to replace a missing one on my game. Send me a message with cost + shipping to 98272. Thanks, David

Have a Saturday Night Slam Masters CPS 1.5 "Dash" which I phoenixed. Thought I had a bad rom set but turned out to be a bad Kabuki. Replaced it with on from my Punisher and it booted right up. So now the question is, where do I get another Kabuki? I know they are a Z80 at the core but you...

Looking for SNK Prehistoric Isle schematic. The one at http://arcarc.xmission.com/…/Prehistoric_Isle_Schematics.pdf doesn't match the board I am working on. Thanks, David

I found schematics for the GX587 (upper) board but can't find them for the GX400 lower board. Anyone know of a source for the full schematics or at least the GX400 PCB. Thanks, David

Repair Log: Shadow Dancer Sega System 18 PCB Problem 1: Bad sprites in player and other screen objects Reseated Rom board: No change Checked all roms: Matched mame Probed around with logic probe and didn’t see anything odd. Saw a clutch hitter on ebay for cheap so picked it up to do some...

I have a STV board that the cartridge slot is destroyed (partly melted). I suspect one of the pins got bent then the cart was inserted and caused a short. Looks like it should be possible to replace it if I can find the part. Anyone know of a source? It's marked JAE PB24-182TCA-1 Thanks, David

I have been following the instructions at http://arcadecollecting.com/dead/cps-q.html Trying to bring a SNSM board back to life. Roms on B board are marked MBU xxB. I did the C board mod and verified it works (have a punisher also that I phoenixed following the instructions). I replaced the...

I have a punisher boardset here, battery died of course so working on phoenix. From the dead battery society page http://arcadecollecting.com/dead/dead.html Punisher (US 930422) (with 8bit, 32 pin EPROMs) If your board has any 32 pin EPROMs in sockets 24, 25, 26, 27, 28, 29, 30, and 31, use...

I have a couple of dimms that are missing batteries. And tracking down replacements is a non starter. I have a couple of ideas on how to build new sega naomi/chihiro dimm batteries but I need a couple of existing packs to experiment with. My idea is to replace them completely (including the...

Have all the rest of the parts but no interface board. If you have one to sell let me know. 98272 zip code.

Picked up a pair of these over the weekend, need to do some trouble shooting and can't find a manual. Anyone know of one on the next? Or failing that have one in hardcopy (English) they are willing to sell?

Looking for a working MK4 board set. Let me know price and shipping to 98272

I am missing the handle (part the screw goes through) from the right hand side controller. Need that or willing to buy the pair to have spares. Anyone?