Search results for query: *

no sound FIXED I had the same problem on a Silverball mania......luckily I had a Nitrogroundshaker soundboard to test with, after replacing all the socketed chips with known good ones......no love the NGS board worked perfect in the SBM so I knew it was in the board, FIXED!!!! turned out it...

get a manual Rich, do yourself a big favor and buy the manual it will have the info you are looking for in it as well other info you will need down the line.......ebay always has some or better yet go to http://www.pbresource.com/ steve will have one plus many more factory parts

coil info not sure what the J and AE stand for but the 26 is the wire gauge and the 1500 is the number of turns of wire on the coil.......... so it should ohm out at the same value as the old coil

check out marvins pinball repair sight check out marvins pinball repair sight http://www.marvin3m.com/fix.htm it will give you all the info you need to get your new game up and going BTW i have 14 games now and that was my first game also, sold it but still love the game........... just like...

hope this helps i may be stating the obvious, but in general the transistors will turn each other on smallest to largest to complete the coil circuit to ground via the switch matrix which would trigger the smallest transistor, either the switch matrix is triggering it or something else is...

go to pinballninja.com go to pinballninja.com http://www.pinballninja.com/?p=4457#more-4457 and scroll down to repair #312 it is on a C/C shartshooter and has some good info with pics the whole website is great for that matter!!! BTW i also have a sharpshooter that i am trying to get going.

Help NEED PARTS!!!!!picked up a 1971 Chicago Coin Sharpshooter and found out it is missing the trigger assy and guard, also need the mounting piece that swivels that is attached to the base via 2 big setscrews. Any leads would be appreciated I do alot of pinball repair but this is my first gun...

Help NEED PARTS!!!!!picked up a 1971 Chicago Coin Sharpshooter and found out it is missing the trigger assy and guard, also need the mounting piece that swivels that is attached to the base via 2 big setscrews. Any leads would be appreciated I do alot of pinball repair but this is my first gun...