Search results for query: *

I just started to get back into repairing the motion on my afterburner cockpit. I have the motors out and test them in test mode. When I move the joystick and am connected to the side to side motor, it moves the wheel. But when I move right it moves but not left. Also when I move the...

Does anyone know if you can change out the 4500 middle board area to an upgraded version. I only have the 4 games and want to get cricket and others, etc???

I am looking for any fellow afterburner Dlx owners around the Syracuse, NY area. I am still trying to get the motion correct on mine. All the similar issues as others on here but can't get it right. I have numerous parts and motors but still can't get it going. Looking for anyone close by...

Ok so I turned on my OW yesterday and was fine. Noticed later on that the screen was black. Reset it and get sound and hear it startup but no picture. Assume it is something with the monitor but not sure what. Anyone have any ideas what it could be.

So I finally got some replacement main boards for my afterburner Dlx. I swapped them out to see if I could get any motion. I have both motors out of the machine just next to it. When I go into test mode it gives me motion when I push forward and to the right on the same motor and no motion...

Ok everyone I am putting in another board on my afterburner dlx. I have a few others to try. When I took it apart noted most everything, but I am stuck on a few connections. Also there are two molex connectors on the right side of the board when looking in at it. Are there suppose to be a...

Does anyone have a diagram or chart on which chips to swap on thunderblade board to make it afterburner.

Super Monaco Gp and Thunderblade Board to Afterburner Board How do I convert a thunderblade board and super Monaco gp board to an afterburner board. I know they say you have to change the roms, but not sure what ones and how. Also is there someone out there that convert rewrite them to...

I have been trying to get the motion right in my afterburner cockpit. I took the main board out again and looked at the large pin connector. This is what I found. Any thoughts or solutions?

Another update on mine. I rebuild both of my triac boards and plugged it in. I have both motors out but plugged in to test. As soon as I turn it on it tries to test the motors and trips the breaker (main). If I unhook the board it will start up. Then I hook it back up and go into...

I need help on my triac board for my afterburner deluxe. I tested the triacs and came up with only one good one. I have replacement triacs, but I also tested the little square black box snubbers or film capacitors. Only one of them tested good also. I have not been able to find them since...

Can anyone help me with the removal of the motor units. I am taking out both the pitch and rolling unit. I have the bolt to draw down the spring, but when I screw in the bolt it just starts to twist the rubber grommet above the spring and the black part in the spring. I have turned it a...

I need some help with my afterburner cockpit. I put a different triac board in and it seems to try and start up but starts to hum aclittle like it is trying to move the motors and then trips the main breaker. I unhooked both motors and started it up and went into test mode. I reconnected the...

Ok I have another issue with my screen. I was working on my operation wolf game and it all of a sudden went black. I still have sound and you can hear the game, but there is no picture at all. It is a G07 monitor. Any help would be great?? thanks MIke

Does anyone by chance have a Triac board for an afterburner cockpit or know the best ting to do to repalce them. I am going to replace all 4. Hopefully this will fix the problem. thanks Mike

Can someone tell me the best things to use to clean a board of dust? thanks Mike

Need advice. Someone is selling a Ms. Pacman in fairly good condition. Everything is working on it but it needs a new wiring harness. They are asking $350. Is this a good price? Also what would a new harness cost and how much work is involved in switching it out? thanks Mike

Hello all. I need help with my afterburner cockpit. I replaced the pitch motor. I then turned on my game and it started the test. It rolled to the right and keeps trying to roll that way. Then it immediatley trips the breaker. I tried it with the pitch motor disconnected and it did the...

Ok I have an operation wolf and the screen that is displayed for game play is backwards. If I look in the back of the cabinet the monitor is perfect and normal. I am just getting the reverse image on the mirroe. It is a GO7 monitor. I asssume I have to reverse the image on the monitor so it...

Looking for a working Operation wolf board. Sound is fine, just need main board. Also, does anyone know if this will fix the issue of the shots not registering on the screen. Also seeing if someone has a gun board also.